East European Scientific Abstracts. Materials Science and Metallurgy. No. 24 [electronic resource].
- [Arlington Va.] : [publisher not identified], 1968.
- Physical Description:
- 88 pages
- East European scientific abstracts - Materials science and metallurgy (1966-1972) ; JPRS-44935
- "Relative Dispersion of Values found for Strength in Creep for Alloy Steels Type NiCr20Ti3AlB." by PROTIVA, Karel -- "Calculation of the Active Coefficient on the Basis of Thermodynamical Data." by FREMUNT, Premysl -- "Direct Determination of Sodium in Fuel Oils by Atomic Absorption Spectrophotometry." by VLASTNIK, Jiri, HORACEK, Josef -- "The Effect of the Content of Si on the Chill Depth in Iron Castings." by KAMENSKY, Robert, DAROVNIK, Juraj, STRANSKY Karel -- "Methodology of Phase Analysis of Breakdown Slags." by BODA, Emil, BALLO, Vladimir -- "Modulated Structures in Substituted Metal Solid Solutions." by SEBO, Pavel -- "Thermogravimetric Analysis of Fuel Oils Used in Czechoslovak Metallurgical Works." by MASEK, Vaclav -- "Non-Destructive Testing of Heavy Steel Castings." by KOSNOVSKY, Zdenek, MICKERTS, Ervin -- "Determination of Oxide Occlusions in Roller Bearing Steels." by PISTEK, Petr, POKORNY, Jiri -- "Round-Robin Tests Using a Pair of Samples" by DOERFFEL, Klaus -- "Application of the Linear Heating Method in the Study of the Oxidation of Copper Alloys" by BERGNER, Dieter, GONSCHIOR, Guenther -- "Electrochemical Studies on the Simultaneous Precipitation of Zinc and Cadmium" by RIESENKAMPF, Antoni -- "Determination of Losses in Material during the Steel Process, for the Purpose of Normalizing the Use of Materials" by SZUBARGA Henryk -- "A Method for the Reduction of the Extent of Permanent Deformations in Cutting of Pressings from Metal Sheets and Belt Material." by BURES, J., UNCOVSKY, A., TOMKA, J. -- Experiments with paint coatings used in chemical plants by Kovacs, Jozsef -- "Colloquium of the Research Institute for Non-Ferrous Metals [Forschungs-institut fuer [Illegible] in Freiberg" by FISCHER, Wolfgang -- "Lead Basis Anticorrosion Materials." by BILEK, P. -- "On the Effect of Cold-Forming on the Corrosion Behavior of Iron in Hydrochloric Acid" by ENGELNARDT, Reiner -- Investigation of the corrosion resistance of aluminum and its alloys at various chemical plants by Lichtenbergne, Bajza Edit -- Likhtenbergne, B. E., Katona, Emil -- Contamination of the atmosphere in chemical plants and its effect on the corrosion of structural materials by Bacskai, Gyuls -- Results of twelve years of investigations of the corrosion resistance of passivated zinc coatings on steel under atmospheric conditions by Bestek, T. -- Corrosion products forming on cadmium in natural and artificial environments by Biestek, Tadeusz--Bestek, T., Niemiec, Jan--Nemets, Ya. -- "A Method for the Preparation of Concentrates Containing High Amounts of Manganese, Electrolytic Compounds of Mn, Synthetic Mn Oxides, and Mn Salts." by FEKETE, S., HORVATH, A., SEVER, J., SZALO, J. -- "A Method of Leaching W, Mo, or V from Raw Materials Containing Oxides of the Metals Using Alkali Under Pressure." by STADLER, B., JIRICEK, B. -- "The Chemical-Thermodynamical Fundamentals of the Separation of Lead from Zinc by Differential Rolling, and Its Application in Plant Investigations at People-Owned Enterprise Albert Funk Mining and Metallurgical Combine in Freiberg. Part 1: The Chemical-Thermodynamical Fundamentals of Differential Rolling" by FISCHER, Gerhard -- "Mechanical De-Scaling of Rolled Wire" by DIMITROWA, S. -- "Some Problems in Using Forged and Hardened Rolls for Cold-Rolling Sheets and Strips" by KRZANOWSKI Andrzej -- "Experimental Rolling of Cylindrical Rods from Continuous Ingots" by STANCZYK Jozef -- "Experience Gained in Addition of Lime for the Intensification of Agglomeration Operation at the Iron Works of Eastern Slovakia." by PONEVAC, Jan -- "Use of Uniform Size Coke in a Blast Furnace." by PUNCOCHAR, Zdenek.
"First Year of Operation of the Oxygen Converter Steel Plant at the IWES." by ZDENEK, Zdenko, KUBENA, Slavoj -- "Steps for the Prevention of Flaking in Square Slabs and Round Stock at the Vitkovicke Zlezarny." by SICHA, Miroslav, SINDEL, Zdenek -- "Laboratory and Pilot Plant Experiments in the Production of Prereduced Pellets." by POLEDNIK, Frantisek, LEITNER, Jindrich, CERNY, Vaclav -- "Economical Operation of High Temperature Hot Blast Stoves." by LUKES, Vlastimil -- "The Influence of Asphaltite on the Coking Properties of a Coal Charge." by MASEK, Vaclav -- "Operational Experience at the Start Up of the 150 Ton Tandem Furnace in the Steel Mill of the NHKG Plant at Ostrava-Kuncice." by BOHM, Zdenek, HAROK, Milan, KOZINA, Antonin, VANICEK, Vaclav -- "Production of Molds by the Squeezing Method Using Sliding Patterns." by POLASEK, Bohumir, SEDLAK, Josef -- "A Semi-Permanent Mold for Casting of Runway Blocks of Low Frequency Furnaces." by BRADAC, Richard -- "Drying of a Blast Furnace Hearth Before the Blowing-In Operation." by DRABINA, Josef -- "Evaluation of the Efficiency of Multicomponent Homogenizing." by HANCL, Jaroslav -- "Alteration of Coking Properties and the Analysis of Coal Dust Carried Over During the Charging Operation of Coking Retorts." by MASEK, Vacalv -- "Effect of an Increase in the Oxygen Content on the Structure of Rimming Steel Ingots." by PARMA, Vaclav -- "Thermodynamics of Coil Annealing in Hood Type Furnaces." by FIK, Josef -- "Production of Blast Furnace Accessories." by KRCHNAK, Karel -- "Tandem Steel Making Furnace at the Vitkovice Iron and Steel Plant." by ADAMEK, Frantisek -- "Model Analysis of Production Economics in Mechanized Foundries." by URBANEK, Miroslav -- "Evaluation of New Tests in Grey Iron Foundries." by VETISKA, Ales -- "The Effect of Coating Solutions and of their Drying on the Strength of Ceramic Molds." by DOSKAR, Josef, GABRIEL, Jan -- "Fabrication of a Mold for a Milling Machine Frame." by KRACMAR, Rudolf -- "A Contribution to the Morphology of Sodium Silicate Envelopes on Sand Grains." by JELINEK, Petr -- "Test Results with Oil-Oxygen Roof Burners on a 160-Ton Furnace with Solid Charge" by KEIL, Klaus, LEHMANN, Werner, SCHICKE, Horst, SCHLIEKER, Wilhelm, BIELKE, Georg -- "Equilibrium Values of Phosphorus in Various Blast Steel Processes" by SHENOUDA, Fayek -- "Distribution of Moisture in Sand Moulds" by SZRENIAWSKI, Janusz -- "Effect of Composition on the Hardness of Thin-Walled Castings Made from Grey Cast Iron" by SAKWA, Waclaw, WARCHALA, Tadeusz -- "On the Problem of the Injection of Auxiliary Fuels, Especially of Soft Coal Powder, into Blast Furnaces" by MANGELSDORF, Juergen -- "On Perfecting the Casting of Steel with the Aid of Synthetic Slags" by RIETZ, Lother, SCHULZ, Peter, HINZE, Hanfred, PAPROTNY, Gerhard -- "Energetic Advantages of Hot-Blast Cupola Ovens and of the Use of Coke Briquets" by DUBIEL, Wladyslaw -- "Accounting for the Use of Charge Materials in Standard Cost Computations" by WOZNICA Walter -- Physico-chemical base of glass coatings in the form of aerosols by Botvinkin, O. K., Borisova, I. I., Rjabov, V. A. -- Corundum ceramics for high-temperature furnaces with hydrogen atmosphere by Kvapil, Jiri--Kvapil, Irzhi, Dolejs, Vaclav- Doleysh, Vatslav, Kment, yitezslav -- Sun-screening glass -- Point defects in neutron-damaged silica glass by Lungu, S. -- Some problems of airtight bonding of metal and ceramics by Hangos, Istvan -- "A Method of Annealing Coils of Silicon Containing Electrotechnical Steel." by KUPCAK, A., EBNER, P., BENDA, P., BOJDA, B., LICKA, I., PERINA, O., ZIDEK, A., MYNAR, M., STANEK, M., CECH, D., KASPRIK, B., MILOSEVSKY, L. -- "A Method of Thermal Treatment of Cold Rolled Belts Made from Silicon Steels." by KUPCAK, A., STANEK, M., INDRA, K., KRENEK, D., PERINA, O., LICKA, I., BENDA, P., ZIDEK , A., CECH, D. -- "A New Method for the Homogenizing Pretreatment of Strips with Direct Resistance Heating" by GOCZAL, Zan, GOLEK, Jan, LASOTA, Julian -- "Magnetoelastic Torsion Probes." by MARTINIK, R., KOBLIZEK, V.
"Rolling Stand Dynamics." by STYBLO, Karel -- "Retractile Sampling Device." by MACECEK, B. -- "Investigation of the Extrusion Plate Attrition in Rod Drawing with the Aid of Radioactive Isotopes" by HOLZNEY, Joachim, BECHSTEIN, Dietrich, KRUEGER, Gottfried -- "Results of Plant Tests and Optimizations of the Pass Schemes for a Four-High Reversing Cold-Strip Housing" by WEBER, Karl-Heinz, SCHOELER, Horst-Hugo, BLADECK, Ulrich -- "Effects of Some Factors on the Quality of Self-Fluxing Sinter" by MAZANEK, Eugeniusz, JASIENSKA, Stanislawa -- On criteria for changing lubricating oil by Grzadziela, Albert -- "Use of a Ni-Fe Alloy for Contacts in Electric Switches and Similar Apparatus." by CERNY, V. -- "The Influence of Thermal and echanical Treatment on the Properties of Austenitic Steel Type 18/8 Stabilized with Titanium." by KATEJOVIC, Karel, SKODA -- "Fatigue Pitting in Rollers and Gears Made of Spherical Graphitic Cast Iron" by PACNOWSKI, Mieczyslaw -- "Wear Resistant Alloy." by EBERL, J. -- "Aspects of the Use of Ni-Mn-Mg Alloys in the production of Nodular Iron." by TOMAN, Lubomir, DRYSL, Emil, FREYN, Rudolf -- Possibilities for improving high-silicon iron alloys by Mechura, J., Klaban, J. -- Effect of alloying with titanium on the capacity of iron of nitrogen case hardening by Konkoly, Tibor -- "Some Problems in the Development of Fast Power Reactors." by SELC, Vlastimil, PASEK, Miroslav -- "Basic Problems of Dosimetry of D₂O in Nuclear Reactors." by DAVID, Lubomir, TOMASKOVA, Lenka -- "Contribution to the Study of the Kinetics and of the Mechanism of Solution of Uranium Oxides in Sulfuric Acid Solutions." by NEUMANN, Leo -- "Packing for Nuclear Reactors, and in Particular for Fuel Elements." by VELECHOVSKY, Vaclav -- "Emergency deduction of the Output of a Power Plant Reactor." by HRSTKA, Vladimir, STANEK, Bedrich -- "Experimental Investigation of Local Heat Transfer Coefficients in the Spacers of a Fuel Element." by LUKES, Emanuel, VLCEK, Jiri, WEBER, Petr, CAJZL, Milos -- "Vaporization of Actinides and of Their Compounds. III. Vaporization of Some Compounds of Uranium." by KRIVY, I. -- "Dynamics of the Moderator of the TR-O Reactor with a Regulating Overflow." by KREJCI, Miloslav, BLAZEK, Josef, ZIKAN, Miloslav -- "Physical and Chemical Properties of Vitreous Materials Made from Basalts and Designed for High Level Radioactive Waste Disposal." by SAIDL, Jaroslav -- "Corrections which Must be Made to Compensate for the Presence of Potassium in Measurements of the Total Beta or Gamma Activity in Biosphere Samples." by ZADUBAN, Milan, MEDVIDOVA, Lydia -- "Ten Year Anniversary of the Nuclear Research Reactor at the Institute of Nuclear Research of the Czechoslovak Academy of Sciences." by MUSILEK, Frana, CAPEK, Milan -- "Production of Uranium Carbide Fuel for the DOR Reactor." by VESELY, Vladimir, KORTUS, Josef -- "Apparatus for the Production of Fuel Rods." by VELECHOVSKY, Vaclav -- "Study of the Decay Ba¹²⁸ to Cs¹²⁸ to Xe ¹²⁸." by KUCAROVA, Todorka, ZVOLSKA, Vlasta, KRACIK, Borivoj, MASTALKA, Antonin -- "Gamma Radiation of Cs¹³⁶." by FRANA, Jaroslav, REZANKA, Ivan, SPALEK, Antonin, MASTALKA, Antonin -- "On an Approximative Method of Solution of Some Boundary Value Problems in the Theory of Nuclear Reactors." by ZEZULA, Rostislav -- "Compensation of Poisoning by Absorbing Elements Dissolved in the Moderator." by PERNICA, Rostislav -- "Indicators of Conditions of Neutron Irradiation in Reactors." by VOLF, Frantisek, KORECKY, Jiri -- "Co-precipitation of Trace Amounts of Strontium with Barium Chromate." by BENES, Jaroslav, KYRS, Miroslav -- "Separation of Alkali Metals by Extraction Chromatography with Dipicrylamine and Nitrobenzene." by KYRS, Miroslav, KADLECOVA, Libena -- "Evaluation of Methods for the Measurements of Thermal Neutron Spectra, and a Method Proposed for the Measurements Made in the Reactor TR-O." by BARDOS, Josef -- "Method for Dynamic and Static Calculations of a Cylindrical Multizone Reactor and its Application to the KS-150 Reactor." by BARDOS, Josef -- "A Signalizing Dosimeter." by CECH, Jan.
"Use of the Method of Beta Radiation Reflection for the Determination of Lead in Minerals." by HUDEC Imrich -- "Welding of the Shortened Model VM 1:1 of the Pressure Vessel of the KS-150 Reactor." by BECKA, Josef, KONIGSMARK, Jiri, KRICKA, Pavel -- "Film Dosimetry Service for All of Czechoslovakia. Part III. The Evaluation of High Level Doses, Errors in Determination, and the Organization of the Service." by TROUSIL, Jaroslav, BUCINA, Ivan -- "A Preamplifier for Semiconductor Radiation Detectors." by BOUCEK, Jiri -- "Gamma Radiation of Ce¹³⁵." by REZANKA, Ivan, SPALEK, Antonin, FRANA, Jaroslav, JURSIK, Jiri -- Steam generators for nuclear power plants with pressurized water reactors by Fratzcher, Wolfgang, Schmidt, Gerhard -- A CdS dosimeter for phantom and intracavitary measurements by Kunze, J., Gnauck, C. -- Neutron-physical nuclear reactor calculations by Meyer, K. -- "Power Build-Up in a Fast-Reactor System" by FRANKOWSKI Waclaw -- "A Gas Type Scintillation Counter Filled with Argon" by CIARKOWSKI Adam, MACHALICA Piotr, PAWLOWSKI Zdzislaw -- "Rollers with an Indefinite Chilled Margin." by KAMENSKY, Robert, PISKOR, Jaromir -- "Measuring of Crystallographical Orientation by an Optical Method Using a Goniomicroscope." by ZITEK, Vladimir -- "Carbide Lattice in Bearing Races" by RODEK Miroslaw -- Estimation of energy dissipated in the course of a plastic deformation process of some metals by Klepaczko, J.--Klepaczko, Janusz -- "Fire Clay Refractory Concrete with a Shale Aggregate and with an Aluminous Cement." by FIALA, Jaroslav -- "Factors Influencing the Rate and the Quality of Production of Peeled Steel." by HORNICEK, Zdenek -- "New Metallurgical Processes in the Production of Casting Steels." by CHVOJKA, Jan -- "Niobium Alloyed Steels for Welded Structures, and Resistant Against Brittle Fracture." by SICHA, Frantisek -- "Study of Homogenizing of Hadfield Cast Steel." by SLESAR, Milan, KAMARAS, L. -- "Remelting of Hadfield 12% Manganese Steel in Basic Electric Arc Furnaces by Injection of Oxygen." by STRANSKY, Karel, PANT, Eduard, KOSTAL, Karel -- "Metallurgical Factors in the Production of Heavy Steel Castings." by KOSNOVSKY, Zdenek -- "Contribution to the Brittle Fracture Behavior of Unalloyed Steels" by PYSZ, Gottfied -- "On the Martensite Hardening Steel Problem" by PAUL, Neinrich, KLEMM, Peter, SCHMITZ, Otte -- Comparison of the strength of heat-treated steels after normal and after bainite tempering by Eisenkolb, Friedrich, Riehle, Manfred -- "Comparison of the Lifetimes of Ingots made of Gray and Spherical Graphitic Cast Iron" by LEWANDOWSKI, Kazimierz -- "Carbomization of the Steel Bath by Injecting the Carbonizing Materials with a Compressed Air Blast" by KRUCINSKI, Marian, OSYKA, Zygmunt, CHOROBIK, Adam, HANSEL, Wladyslaw -- "Divergent Views with Respect to Cracking and Cracking Origin [in Steel Castings]" by LWOWICZ, Piotr -- "Effect of Refining Duration on the Quality of Bearing Steel" by MAMRO, Kazimierz, SERWICKI, Henryk, TABORSKI, Jan, MISKIEWICS, Witold -- "Undue Increasing of the Carbon Content in Surface Layers During the Carburizing of Cr and CrMn Type Steels" by STAUB, Fryderik, TYMOWSKI, Jerzy -- "Non-Metallic Occlusions of Steel that Had Been Cast in a Vacuum Chamber or Degasified in the Ladle" by KRUCINSKI, Marian -- "Chromized Sheet Metal - - a Novel Material for Food Cans" by KOTARBA Zdzislaw -- Mechanical properties of voided Joints of naval steels by Swiatkowski, Ryszard -- Resistance of some low-alloyed steels and their welded joints to atmospheric corrosion by Kaluza, Franciszek, Michalik, Jozef -- "Some Factors Affecting Hot Rolling Properties of the Cu₈Sn₈ alloy." by HELLEBRAND, Ladislav -- Automatic welding of elastic bellows from acid-resistant steel by Zatyka, Henryk, Chrzanowski, Marian -- Use of radioisotope sensors for automatic welding of curvilinear seams by Kaluta, Romuald, Pruski, Andrzej -- "Some Consequences of Dust Nuisance and of Waste Gases." by ITTENSOHN, Jaromir -- "Optimization of the Quantity-Space-Time Coupling in Multistage Apparative Processes, Presented on the Basis of an Example of Processes in the Non-Ferrous Metals Industry" by [Illegible], Peter.
- Document Date: 4/4/1968.
- Reproduction Note:
- Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
- Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 21333571