Actions for USSR Scientific Abstracts. Engineering and Equipment. No. 28 [electronic resource].

Email RIS file
Bookmark
Report an Issue

USSR Scientific Abstracts. Engineering and Equipment. No. 28 [electronic resource].

Published
[Arlington Va.] : [publisher not identified], 1966.
Physical Description
271 pages : figures
Access Online

Availability

I Want It
I Want It

Finding items...

Series
Contents
Influence of the transverse velocity of the flow in an incompressible boundary layer on the instability of the laminar state of the flow by Alekseyev, Yu. N., Korotkin, A. I. -- Homogeneous vortex motion of liquid in a cone with a diaphragm by Bostandzhiyan, S. A. -- Nonstationary flow of incompressible fluid around the lattice of thin curvilinear profiles by Saren, V. E. -- Simplified formulas for the calculation of sandwich panels with fillers by Bryukker, L. E. -- Equations for sloping and non-sloping sandwich-type shells by Kurshin, L. M. -- Stability of cylindrical sandwich shells under compression, pressure and the combined effect of pressure and compression by Kurshin, L. M. -- Calculating the stability of sandwich panels beyond the limit of proportionality by Kurshin, L. M., Lamper, R. Ye., Lipovtsev, Yu. V. -- Natural oscillations of round cylindrical sandwich shells with freely suspended and clamped edges by Suvernev, V. G. -- Natural oscillations of spherical sandwich shells with freely suspended and clamped edges by Suvernev, V. G. -- The twisting of framed cylindrical shell with long right-angle notch by Galkin, S. I. -- Optimal parameters of sandwich panels and sloping shells with filler of nonreinforced and reinforced foamed plastic under compression by Aleksandrov, A. Ya., Naumova, M. P. -- Calculation of an aircraft fuselage in the wing region with asymmetric bending by Malashenko, L. A. -- On the theory of the analysis of orthotropic sandwich plates with rigid filler by Prusakov, A. P. -- Experimental study of a flow of dissociated gases through a supersonic nozzle by Ionov, V. P., Nikolayev, G. N. -- Calculation of the recombination rate constant of diatomic gases from the Mach number at the outlet of a supersonic nozzle by Nikolayev, G. N. -- The TU-144 Will Be the First Supersonice Passenger Aircraft -- Determination of ranges for changes in valve motion curves and the gas distribution phases under the effect of a controlling mechanism by Lyubechanskiy, I. F. -- Computing transition processes in the YaMZ-238 diesel engine on an M-3 electronic computer by Khramov, Yu. V., Klimov, Yu. I. -- Physiological criteria for smoothness of automobile operation by Rotenberg, R. V., Burlachenko, N. I. -- Accelerated road testing of trucks by Dmitrichenko, S. S., Shevchenko, A. I. -- Determining the dimensions of air scoops for rear-engine cars by Vasserman, G. M., Dechev, V. I., Ol'yak, V. D. -- Engineering economic effectiveness of adopting aluminum radiators by Gorbunov, M. S., Burkov, V. V. -- The water tower of reinforced concrete in the town of Kladno by Morkovin, V. V. -- Building a road bed across marshes for the transportation of limber by Tkachenko, A. A. -- New space design solution for local airline airports and air terminals by Yevreynov, Yu. N. -- Built by a squad by Shchepelev, N. -- Use of assembled reinforced-concrete shells for construction of bridges and landing piers by Grishin, G. -- Jet ignition is an effective means of increasing economy and completeness of combustion in automotive engines working on gasoline and liquified gas by Zhdanovskiy, N. S., Gitlin, N. N., Nikolayenko, A. V., Kozhushko, K. I. -- Nonisentropic nonequilibrium gas flew through a nozzle with allowance for friction and heat transfer by Pleshanov, A. S., Kon'kov, P. A. -- Calculation of blow-off regimes of combustion in the wake behind a bluff body using the ignition delay time by Mironenko, V. A. -- Thermal regime of ignition, in a Couette flow by Yershin, Sh. A., Rybalova, R. P. -- A study of the stability of a detonation front in a gas mixture by the Chapman-Jouget model by Aslanov, S. K., Controlled combustion -- One-dimensional instability criterion of a gaseous detonation by Aslanov, S. K. -- Study on the formation and evaporation of fuel films by Gershman, I. I., Pik, O. K. -- Discussion of efficiency by Kharkevich, A. A. -- Application of dimensional analysis to the study of the mechanism of bedrock disintegration by explosion by Stankeyev, A. V. -- Oil cooler made of tubes with low spiral fins by Kuznetsov, Ye. F., Mesh, R. I., Shakbnovich, I. Ye. -- Thermal stress with cooling of gas turbine disks by Tsaplin, M. I. -- Calculation of diffusional combustion in the boundary layer of a high velocity stream by Yarin, L. P. -- Selection of the mean heat load of the surface of a fuel element of a water-water vapor reactor under pressure by Ul'faskiy, G. V. -- Simulation of large ejection explosions by Sadovskiy, M. A., Adushkin, V. V., Rodionov, V. N. -- The effect of transport processes on the stability of a flat flame front by Istratov, A. G., Librovich, V. B. -- Thermal theory of ignition of condensed substances by Averson, A. E., Barzykin, V. V., Merzhanov, A. G. -- Formation of the gas flow before the flame front by Salamandra, G. D. -- Calucaltion of natural convective heat transfer in turbine cavities using a digital computer by Arkad'yev, B. A., Shatrovskaya, G. N. -- The effect of the exit port design on the aerodynamics of a jet discharging from a circular turbulent burner by Zhukov, I. T., Poletayev, A. V. -- Ignition of particle aggregates in a heterogenous reaction by Klyachko, L. A. -- Study of the stability of a detonation front in a gas mixture by Aslanov, S. K. -- A diesel engine operating on water-fuel emulsions by Sergeyev, L. V. -- A graphic analytic method for calculating the hydraulic and mechanical characteristics of valves by Derbaremdiker, A. D. -- Use of the principles of the wave movement of alluvium in calculating channel deformations by Znamenskaya, N. S. -- Laboratory investigation of the structure of the bottom layer by Klaven, A.B. -- Use of hydrologo-morphological analysis when planning collector wells by Popov, I. V. -- Types of river beds in northeast Soviet Union and the Kamchatka Peninsula by Pin'kovskiy, S. I. -- Initial experience in the operation of the "Trudkommuna" lock by Bocharov, V., Fil'kov, V. -- Topping of natural gas under pressure by Kuliyev, A. M., Tabatabai, A. M., Alekperov, G. Z., Ibragimov, M. M. -- Milling solids of revolution with a heated cutting zone by Zaytsev, V. I., Sozinov, A. I., Lobanov, V. M. -- Development of a guide surface for winding a pliable band into a continuous tube by Baldina, Ye. M. -- Manufacture of a diamond tool by powder rolling by Katrus, O. A., Kovalev, S. N., Vonogradov, G. A., Bernik, Ye. B. -- Operational experience in using milling machines with numerical preset control by Safragan, R. E. -- Work done by technological laboratories in plants by Vaks, D. I. -- Instructions for the design of reinforced concrete tanks for petroleum and petroleum products -- Industrial operation control model (IOCM) by Teymurov, V. M. -- Investigation of the hot-rolling process of iron-aluminum alloys by Pavlov, I. M., Mekhed, G. N., Suvorov, V. A., Tarasevich, Yu. F. -- Two new methods of eliminating imbalance of parts by Bulychev, V. A. -- Information selection methods in geophysical mine prospecting by the sounding method by Mikhaylovskiy, V. N., Pervushin, V. N. -- The effect which filling the piston cavity of a 4NVD24 engine with oil has on piston head temperature by Murel', P. Kh., Soskind, G. L. -- Calculation of the circulation distribution over rectangular hydrofoils of arbitrary elongation with a type ETsVM BESM-2M by Tkachenko, I. P. -- A hydrofoil of small extension at the interface of two fluids with different densities by Putilin, S. I. -- A hydrofoil of minimum induced resistance in a fluid of finite depth by Zinchuk, P. I. -- Hydromechanical characteristics of an insulated hydrofoil moving above a screen by Koval'chuk, S. V., Tkachenko, I. P. -- Calculation of the stability of the movement of ships on submerged hydrofoils by Korolev, V. I., The problem of a vertical hydrofoil of small extension in a fluid of finite depth by Belinskiy, V. G. -- Acceleration of technical progress in river transport and problems confronting scientists, planners, and designers. (Abridged text of a report delivered at the XVII Scientific-Technical Conference of the Leningrad Institute of Water Transport on 8 April 1963) by Cherevko, P. V. -- Effect of flow on the draft variation of river boats in shallow water by Pavlenko, V. G., Polunin, A. M. -- Hydromechanical investigations of the safety of freight and passenger river boats in shallow water by Polunin, A. M. -- Experimented investigation of the oncoming flow through a high-speed shrouded propeller by Sandler, L. B. -- Aspirations of Soviet shipbuilding industry by Yegorov, M. -- Development of electric power systems of sea transport ships by Traper, Ye. I. -- Investigation of the friction resistance of ships in shallow water, taking flow into account. Friction resistance of an infinitely wide ship (basic equations) by Pavlenko, V. G., Rudin, S. N. -- A study of marine insulation made of materials with similar heat conductivity coefficients by Nesterov, Yu. F. -- Reducing vibrations of shallow tankers by Gavrilov, M. -- Effect of a ship's speed on pitching and bending in a swell by Rostovtsev, D. M. -- Automatic operation of main engines of motor ship "Danilo Nechay" by Seppen, A. -- Increased level of scientific research by Dubchak, V. -- Operating conditions of whaler power plants by Korshunov, L. -- Economical consumption of fuel by Filippov, A. -- Mooring great refrigerating trawlers to high-tonnage refrigerator transports while in motion in open sea by Kogan, P. -- Electronic and graphic investigation of protective films formed on parts during storage by Shishkin, G. M. -- Welding of polyamides by heating in a high-frequency electric field by Britsyn, N. L., Shelina, T. A., Knyazhskaya, G. S. -- The use of high-temperature thermomechanical treatment in the manufacture of extruded BT-15 titanium alloy tubes by Kishkin, S. T., Glazunov, S. G., Khorev, A. I., Rubin, Yu. L., Shilina, E. M. -- Wear of metal-polymer friction pairs by Kravchenko, V. G., Gorokhovskiy, G. A., Dmitryuk, G. N. -- Determining thickness of the lubricating layer, pressure and coefficient of friction in nonmetallic plain bearings by Kodnir, D. S., Bayborodov, Yu. I. -- Some theoretical problems in wrap-around grinding by Red'ko, S. G., Pomel'tsov, N. V. -- Wear and durability of circular rotary cutters by Granin, Yu. F. -- Effect which diesel design and operating conditions have on the cavitation erosion of cylinder blocks and sleeves by Ivanchenko, N. N. -- Loss analysis with rate of discharge in centripetal turbines under nominal conditions by Prikhod'ko, M. S. -- More accurate calculation of gas exchange in four-cycle engines by Zvonov, V. A. -- Experimental method for determining the mechanical losses of a diesel engine piston assembly by Ryk, G. M. -- Choosing optimum gas distribution phasing during engine operation along a generator characteristic by Tsvetkova, N. I., Stanislavskiy, L. V. -- Gas distribution in a rotary piston engine by Tseslinskiy, A. S. -- Effect of a piston heat shield on operating process parameters and thermal condition of a piston in a highly supercharged engine by Shchegol', A. Ya. -- Designing double-intake centrifugal fan tees by Pak, V. V. -- Motion of atomized fuel jet in a vortex flow by Gurlyand, A. D. -- Choice of nominal rpm of compound engines by D'yachenko, V. G. -- Some results of improving turbine exhaust passages by Zaryankin, A. Ye., Zatsepin, M. F. -- Effect of geometric parameters on the operation of annular axial-radial diffusers by Zaryankin, A. Ye., Zatsepin, M. F., Shakh, R. K. D. -- Calculating the geometric parameters necessary for given cavitation allowances in the centrifugal stages of pumps with helical impellers at the inlet by Dumov, V. I. -- Simulation of thermal fields in experimental investigations cooling systems of gas-turbine cylinders by Antonovich, A. V., Minyaylo, A. F., Thermodynamic calculation of a gas turbine unit using an electronic digital computer by Gel'man, L. I., Smolkin, Yu. V. -- Experimental data on the transient processes of a diesel with turbine supercharging by Krutov, V. I., Shatrov, V. I. -- The effect which sleeve deformation in pump elements has on durability and work capacity by Ivanov, V. N., Ustinov, N. P., Levin, G. I. -- Strength of lightly-reinforced prestressed concrete structures under seismic-type load by Berdyyeva, R. S. -- The stability of single-axle tractors in the turning position by Marshak, S. F., Gol'dshteyn, V. M. -- A study of the static strength of the frame of the ChMZAP-5208 trailer by Koprov, V. P. -- "Methods for Improving the Running In of Friction Bearings" by FEDYANIN, A. I. -- "The Modeling of Creep of Machine Parts Working Under Internal Pressure" by LISTVINSKIY, G. Kh. -- Stroitel'naya Mekhanika Obolochek (Structural Mechanics of Shells) by Kan, Saveliy Nakhimovich -- Fatigue failure of centripetal gas turbine wheels by Gusak, Ya. M., Tsigel'nik, G. I. -- Tension of a rectangular plate with a round hole into which an elastic disk has been welded by Gur'yev, N. F. -- Experimental investigation of a stress-strain state of loessial soil of different humidity under the effect of an explosion by Mel'nikov, V. V., Rykov, G. V. -- Random search method for rotating rotor balancing by Antonov, I. L. -- Axial compressor blade vibrations by Bedcher, F. S. -- Stress in the connecting zone between the supporting cone and a vessel subjected to internal pressure by Bugayenko, S. Ye., Prigorovskiy, N. I., Filimonova, Ye. N., Khurshudov, G. Kh. -- Specification of rotor unbalance limits for turbomachinery by Vekesser, V. A. -- "Harmonic Influence Coefficients in Calculation of Oscillations of a Red System" by GLAZOV, Yu. Ye. -- Strength of intake and exhaust valves in powerful high speed diesels by Kotlyarov, V. V., Abdushelishvili, L. Z. -- Vibration of ball bearings by Skoptsov, L. M., Kuznetsov, Ye. S. -- A method for calculating radial gaps in radial ball bearings with four- and three-point contact by Korostashevskiy, R. V. -- Drawing cylindrical parts with flanges by Vershinin, V. I. -- Statistical characteristics of road surface irregularities and automobile vibration by Afanas'yev, V. L., Khachaturov, A. A. -- Calculation of elastic spring-back of sheet metals during stamping-bending of parts having curved rims using rubber stamps by Komarov, A. D. -- Estimates for panels which are sections of spherical and circular cylindrical shells by Zhumaliyev, B. -- The motion of a rotating sphere of variable mass when the angular velocity of rotation is changed by Sagitov, M. N. -- On a computation method for shells by Zhumaliyev, B. -- Strengthening automobile springs by the method of deformation aging by Kotkis, M. A. -- Measuring the Deformations of the Walls of a Model Silo by Pankratova, G. Ye. -- Checking the Strength of Three-Dimensional Thin-Walled Systems by the Displacements Method by KLIMANOV, V. I. -- Designing a Cantilever Cylindrical Shall With Circular Cross Section for Wind Loads by Karavichev, A. P., Lessig, Ye. N. -- Increasing the reliability and endurance of grab buckets by Karakulin, G. -- Heavy duty tractor trailers require more powerful engines by Karelin, V. N., Leshchenko, Ye. N., Maksimov, V. A. -- Establishment of a permanent commission of the Academy of Sciences,SSSR,for studying transportation development problems -- Use of the rivers of the Ob'-Irtysh basin for transportation -- Aircraft-engine fuel-feed system. Class 62, No. 182531 by Yasinskiy, S. Ya., Polinovskiy, A. Yu., Linets, A. M., Moskovskiy, V. D. -- Inertial transducer. Class 62, No. 182529 by Kokonin, S. S., Reut, A. V. -- Turbojet engine for high velocities by Tumanskiy, S. -- Annular parachute. Class 62, No. 183608 by Privalov, A. I., Yefremov, Ye. T., Petkus, G. V., Korovochkin, Yu. N., [Illegible] G. D., Barykin, L. N., Korolev, A. A., Rakhleyeva, T. N., Nikonorov, B. I., Stepner, B. P., Vasil'yeva, V. S. -- Thermal- and acoustic-insulation covering for aircraft cabins and compartments. Class 62, No. 183593 by Levin, A. Ya., Orlov, V. A., Device for securing the door of a pressurized cabin. Class 62, No. 183597 by Shulyat'yev, G. V. -- Winged fire fighter [An-2P fire-fighting amphibious aircraft] by Kozlov, V. -- Device for controlling an aircraft-flap suspension mechanism. Class 62, No. 183596 by Sosul'nikov, I. L., Chernov, Yu. G. -- Fire control of an antiaircraft battalion in a defense position by Miloserdov, D. -- Determination of permissible unbalance of aviation gas turbine rotors by Chistyakov, A. A. -- Aircraft doors. Class 62, No. 182527 by Belous, Yu. V., Bilyk, G. P., Beketova, L. A., Levochkin, P. A. -- Method of compensating for the aerodynamic asymmetry of propeller aircraft. Class 62, No. 182528 by Antonov, O. K., Anisenko, V. G., Bolbot, A. V., Yeroshin, V. F., Ryshik, Ya. I., Tolmachev, V. I. -- Airplane cloud-transparency meter. Class 42, No. 183440 by Gryts'kiv, I. V., Litvinov, I. V., Lobodin, V. M. -- Automatic device for airplane-flap fatigue tests. Class 42, No. 183448 by Bengus, G. Yu., Litvak, V. I., Muratov, V. V., Yaremenko, V. A., Grishchenko, V. T. -- Mechanical lock for aircraft actuating cylinders. Class 47, No. 183561 by Grachev, V. I., Morgunov, G. M., Popovkin, N. A. -- Control column. Class 62, No. 183595 by Dubrovin, A. V. -- Stand for rolling glued films for covering helicopter rotor blades. Class 62, No. 183602 by Akat'yev, V. I., Gorshkov, M. A., Antonov, V. M. -- Air conditioning system. Class 62, No. 183604 by Kuznetsov, I. D., Shchukin, O. G., Mitrokhin, V. M., Nekrasov, L. M. -- Fuel system. Class 62, No. 183606 by Arinushkin, L. S., Dumov, V. I., Zaslavskiy, G. M., Mayzenberg, S. I. -- Gas-jet ejector. Class 27, No. 183318 by Kogan, P. A. -- On optimum control of elastic flight vehicles by Sirazetdinov, T. K. -- Sky giant by Belolipetskiy, A., Kabayev, V., Karyaka, V. -- Mechanical lock for aircraft actuating cylinders. Class 47, No. 183560 by Vedernikov, V. V., Gavrilov, V. A., Grachev, V. I. -- Aircraft "Vil'ga" by Glyass, A. -- Il-18Ye aircraft for 90, 100, 110 and 122 passenger seats by Murashko, V. -- An-24 aircraft conquers air routes by Kuznetsov, I., Kargin, O. -- New progress made in maintenance of aircraft by Smirnov, N., Mamichev, S. -- Ground servicing equipment by Malanchev, L. -- Investigation of filtering properties of sintered two-layer filters by Gatushkin, A. A., Solonin, S. N. -- Automatic altitude correction device for a gamma spectrometer mounted in an aircraft by Fogt, P. N. -- Mechanism for sampling the working fluid from an aircraft hydraulic system. Class 42, No. 183474 by Kuznetsov, V. A. -- Feasibility of using a vertical gyro during its erection by Pavlovskiy, M. A. -- Increasing the accuracy of gyroscopic devices by Alekseyev, O. G., Demidenko, V. P., Fedorov, I. M. -- Effect of vibration of the base on the operating accuracy of gyroscopes by Pavlov, I. V., Sokolov, Yu. N. -- Calculation of the switch-over time for valves in hydraulic control systems by Zakharov, Yu. Ye., Grigor'yev, P. V., Ryazhkov, Yu. G., Yakimova, L. D. -- Hydrodynamic drive gear. Class 47, No. 183558 by Fakturovich, A. M., Boyko, V. M. -- Fluid hammer in the hydraulic systems of machines by Bashta, T. M. -- Continuous-action hydraulic jacks by Kalinin, N. A. -- Device for the hermetic joining of two pipelines. Class 47, No. 182988 by Akhromeyev, Zh. P., Nyrkov, V. I. -- Roller-hardening large crankshafts by Shkol'nik, L. M., Shakhov, V. I., Shchetinin, D. D. -- Baled lumber in maritime shipping by Yelukov, A., Shcheglov, V. -- Combined turning and pressure machining of shafts by Vyallo, A. A. -- Selection of principal parameters of multichannel digital controllers by Aleksandridi, T. M. -- KONSTRUKTSII I RASCHETY APPARATURY DLYA SZHIZHENNYKH UGLEVODORODNYKH GAZOV (Types and Designs of Equipment for Compressed Hydrocarbon Gases). by TSENTSIPER, Izrail' Arkad'yevich -- UL'TRAZVUK V MASHINOSTROYENII by KHORBENKO, Ivan Grigor'yevich -- Apparatus for cold pressing of pipes from aluminum alloys by Epshteyn, G. G., Melkov, K. I. -- Device for activation and maintenance of an a-c welding arc. Class 21, No. 177574 [announced by the All-Union Scientific Research Institute for Electric Welding Equipment (Vsesoyuznyy nauchno-issledovatel'skiy institut elektrosvarochnogo oborudo aniya)] by Katler, S. M., Alekseyev, Yu. Ye., Belinskiy, S. M., Temkin, B. Ya., Device for stabilizing an a-c welding arc. Class 21, No. 177573 by Leskov, G. I. -- Industrial tests of igdanits at the "Mirgalimsay" mine by Brichkin, A. V., Zabudkin, I. L., Nizovkin, V. M., Baydalinov, G. A., Yeremin, B. F., Zayats, Ya. S. -- Improving the mechanized skidding of logs by Piven', N. I. -- Investigation of IR burners with metal radiators by Levin, A. M., Salikhodzhayev, S. -- Amphibious aerosledge designed by A. N. Tupolev's Design Office by Vorob'yev, A. -- Hydroplanes are winged ships of the future by Pipko, D. -- Hydrofoil attachment for a ship. Class 65, No. 182543 by Aframeyev, E. A. -- Present and future developments in air conditioning on seagoing vessels by Shamshin, V. M. -- Self-propelled barge with a collapsible nose -- Speed regulator for marine diesel by Ryabukhin, O. V., Kulibanov, Yu. M., Neuymin, Ya. G., Petrov, Yu. P., Popov, S. A. -- Parameter variation in the operation of a marine diesel with intense cooling of the supercharging air by Murel', P. Kh. -- Experimental investigation of the system of automatic control of the water and oil temperatures in the power plant of the tanker "Lisichansk." by Petrov, V. P. -- Estimating wear of the 2Ch 8.5/11 engine by exhaust gas analysis by Murel', P. Kh., Soskind, G. L. -- Diving mask with a single glass face plate. Class 65, No. 180101 by Vishnyakov, V. A., Stroganov, V. A., Tugarinov, P. T., Chirimanov, E. V. -- Klimat-4 ship air conditioner by Kritskiy, Ye. D., Slyusarenko, V. I., Kuznetsov, D. A., Getmanets, A. I. -- Sliding bearing. Class 47, No. 182968 [announced by Leningrad Higher Engineering Marine School im. Admiral S. O. Makarov (Leningradskoye vyesbeye inzhenernoye morskoye uchilishche)] by Kel'zon, A. S., Pryadilov, V. I. -- Air distribution through perforated panels in ship air conditioning systems by Taurit, V. R. -- Raising the operational efficiency of marine equipment by Shifrin, M. -- Using rotary compressors in marine refrigeration units by Kan, A. V., Vasil'yev, V. K. -- Operation of low-speed diesel on fuels of higher viscosity by Bol'shakov, V. -- The effect of atomizer tightness on fuel leakage along the valve stem of a diesel injector by Soakind, G. L. -- New air distribution techniques in air conditioning systems on maritime transport vessels by Yankina, T. I. -- The effect of atomizer tightness in a diesel injector on the primary parameters of injection by Soskind, G. L. -- New diesel engines for large river ships by Okunev A. -- Operation of diesel cargo ships with attached barges by Irkhin, A., Murav'yev, A. -- The effect of coordinate determination errors on the accuracy of an automatic navigation system by Yakushenkov, A. A. -- Reliable system for cooling engines by Shkuratov, V. -- Fighting fires by means of vaporized water by Plotkin, M., Surikova, A. -- Floating structure of buoyant type for lifting fluid-conveying hoses by Bolkhovskoy, G. -- Increasing the endurance and reliability of repaired diesel engines by Nemkov, P. -- Parabolic micromanometer by Gusev, V. F. -- Electrochemical vibration meter by Bolashenko, A. P. -- Measuring pressures up to 100 kbar by the free-plunger method by Vereshchagin, L. F., Zubova, Ye. V., Burdina, K. P., Buymova, I. P. -- Mushroom-shaped pressure transducer for shock tubes by Shatilov, A. P. -- Thermal Noise and the Accuracy Limit of Open Inertial Measuring Systems by KRASOVSKIY, A. A. -- Ultrasonic control of macrodefects and local structural inhomgeneities in turbine blades by Rumyantsev, A. P., Fedorova, L. P., Kravchenko, N. A., Tararoyeva, L. D., Krichevskaya, I. V. -- Soft x-ray detector for the 1--12 Å range by Ipatkin, I. S., Bulatov, B. P., Antonov, Ye. A. -- Method for continuously monitoring the value of the "latent energy" by Markov, K. P., Raybov, N. V, Stas', K. N. -- Apparatus for registration of minimum rise over the background intensity level by Tikhonyuk, A. I., Khazanov, B. I. -- Nuclear magnetic relaxometer by Korepanov, V. D., Chernitsyn, A. I. -- Interference measurements of precision gage blocks by means of a helium-neon laser by Yefremov, Yu. P., Kalinin, N. A., Studying Shallow Water Flows With Recording Equipment by AL'TMAN, E. N. -- Hydromechanical error of ultrasonic flowmeters by Kivilis, S. S., Reshetnikov, V. A. -- A method of measuring the displacement of points of a structure in static tests in thermoaerodynamic tubes. Class 42, No. 182373 by Perunina, O. A., Samusev, I. F., Subbotin, V. M. -- Work of VNIIM on the duplication of the meter in terms of units of light waves by Batarchukova, N. R. -- Increasing the sensitivity of a string accelerometer by Tsodikov, Yu. M. -- Metal heat-flow meter for thermophysical studies by Kurepin, V. V., Platunov, Ye. S. -- Dilatometric measurements by Kayak, L. K., Koroleva, A. N. -- Rf resistance thermometer by Volkov, V. G., Pelepeychenko, I. P., Simbirskiy, D. F. -- Drying gas pipeline connections of the DDN-lM device by Gushchin, V. I. -- The RKM-1 Vacuum Focussing X-Ray Camera-Monochromator -- Automatic temperature regulator by Danilov, M. D., Pavlenko, A. V. -- Problems involved in regulation of the accelerating potential of a high-resolution electron microscope [Report, Fifth All-Union Conference on Electron Microscopy held in Sumy 6-8 July 1965] by Iz"yurov, A. V., Pogudina, R. V., Polivanov, V. V. -- On the development of work on the measurement of time and frequency in the SSSR by Titov, V. N. -- Preparation of berylliun windows for gas-discharge counters and ionization chambers. Class 21, No. 177552 by Palatnik, L. S., Fedorenko, A. I., Repkin, B. M. -- Spark chamber with acoustic spark location by Lepekhin, F. G., Ovchinnikov, B. M. -- A precision electronic de current regulator [Report, Fifth All-Union Conference on Electron Microscopy held in Sumy 6-8 July 1965] by Polivanov, V. V., Gerchikova, I. I., Markov, M. Ye., Gilim, N. N. -- IZMERENIYE USKORENIY (Measurement of Accelerations) Novosibirsk 1966, 122 pp, illus, biblio, 2,100 copies printed by GIK, Leonid Davydovich -- Measuring the initial velocity of an impact by Ishutkin, S. I., Sokolov, L. D. -- Effect of vibration on the accuracy of pneumatic size gages by Balakshin, O. B. -- A stand for studying aerodynamic forces acting on the blades of partial turbine stages by Zinov'yev, N. K. -- Measuring temperatures in trawler diesel engine pistons by Rozanov, N. S., Saul', T. K. -- "Window" in a semiconductor spectrometer of charged particles by Babushkin, A. A., Mednikov, A. K., Stroykin, N. I. -- Hydraulic drag in the tangential combustion chamber and gas collector of a gas turbine engine with a radial turbine by Shteynberg, A. S. -- Versatile device for measuring the consumption of various liquid fuels by Mironov, Ye. A., Brail'chuk, P. L. -- "Micro-Hardness Meter With Remote Control Model PMT-4" by SKVORTSOV, G. Ye -- "Interference Method of Controlling Concave Parabolic Surfaces" by INYUShIN, A. I., ShIFFERS, L. A. -- Stand for calibrating marine shafts by Urin, F. G. -- Method and apparatus for contactless measurement of metal-cutting machine tool vibration by Klyuyev, V. V. -- Mechanical device for cleaning tanks by Afanas'yev, A. S. -- Expansion coupling. Class 47, No. 182972 [announced by the Special Design Bureau No. 3 (Spetsial'noye konstruktivnoye byuro No. 3)] by Morgulis, Yu. R., Drizo, V. I. -- Brake-clutch. Class 47, No. 182983 [announced by the Experimental Scientific Research Institute of Forging and Pressing Machine-Building (Eksperimental'nyy nauchno-issledovatel'skiy institut kuznechno-pressovogo mashinostroyeniya)] by Kaptsan, D. Kh., Pirogov, B. V., Yeletin, V. S. -- Broaching with internal chip removal for machining deep openings by Rabinovich, E. Ye., Kovzel', N. I., Kruts'ko, D. A. -- Wear of round rotating cutting tools as a function of cutting edge path in the machined material by Zemlyanskiy, V. A. -- Sliding bearing. Class 47, No. 182969 [announced by Central Scientific-Research Diesel Institute (Tsentral'nyy nauchno-issledovatel'skiy dizel'nyy Institut)] by Sokolov, Yu. A., Gagua, V. D., Khrushchevskiy, A. M. -- Electric contact broaching by Davydov, A. S. -- Jet centrifuge for filtering fuel or oil. Class 46, No. 182958 by Kudinov, Yu. A., and Magnetohydrodynamic theory of lubrication of cylindrical bearings by Shvarts, I. A. -- "Durability of Teeth on the Scoop of the EKG-8 Excavator in the Conditions of Operations at Noril'sk" by ShAMONYA, V. P. -- Rocket troops prepare technical equipment for winter operations by Borzdov, L. M. -- Vehicles and equipment of the rear supply service by Sidorenko, R. -- Standards set for repairs of machines and weapons to be changed by Fomin, M. -- Initiative of armored tank company to honor the 50th anniversary of Great October by Komarov, N., Karnozov, L. -- Airfield battle stations. [Snow clearance at military airfields] by Kartashev, L. -- Resolution and microphotometric graininess of infrared film by Breydo, I. I. -- A photographic method for reproducing the total illusion of reality in the image by Denisyuk, Yu. N. -- Experimental model of a drum-type xerographic copier by Sukonkin, G. A., Neyman, S. M. -- Thermal copying, electronic copying, and electrographic apparatus at the "Inforga-65" Exhibit; Survey of exhibits at the "Inforga-65" Exhibition held from 15 May to 30 June 1065 in Moscow by Zlotnikov, G. G. -- Static punched card input device by Ivans, A. V., Ivane, A. E. -- Flame-ignition and light-fuel-injection system for internal-combustion engines. Class 46, No. 182956 by Kerimov, N. A., Mekhtiyev, R. I. -- Increased reliability and endurance of SMD-14 diesel by Koval', I. A. -- Gas dynamic characteristics of vane-type diffusers of centrifugal compressors by Den, G. N., Tilevich, I. A. -- Characteristics of steam-gas systems with non-aqueous vapors by Gokhshteyn, D. P., Smirov, G. F., Kirov, V. S. -- Calculation and study of a continuous bladeless diffuser in a centrifugal compressor by Skorokhodova, T. N. -- Improving the quality of diesels by Balakin, V. I., Kollerov, L. K. -- Diesel-engine fuel-supply system. Class 46, No. 182960 [announced by Kharkov Order of Lenin and Order of the Red Banner Tractor Plant im. Ordzhonikidze (Kharkov'skiy ordena Lenina i ordena Trudovogo Krasnogo Znameni traktornyy zavod)] by Trembovler, M. I. -- Unipolar generator-pump. Class 21, No. 177511 by Aliyevskiy, B. L. -- Cooling the air in an internal-combustion-engine supercharging system by Martynovskiy, V. S., Minkus, B. A., Barenboym, A. B., Shteynberg, I. B. -- Equipment used with skid tractors in forest husbandry by Il'in, G. P., Ishmametov, A. S. -- Sorption vacuum pump. Class 27, No. 180291 by Martinson, Ye. N., Plechev, B. I. -- Compact machine for producing thin-film elements by Belous, M. V., Kocheshkov, V. P., Permyakov, V. G. -- TEPLOVAYA IZOLYATSIYA V TEKHNIKE NIZKHIKH TEMPERATUR by KAGANER, Mikhail Grigor-yenich.
Report Numbers
Y 3.J 66:
Subject(s)
Note
Document Date: 10/18/1966.
Reproduction Note
Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
Terms of Use and Reproduction
Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 21338065