East European Scientific Abstracts. Engineering and Equipment. No. 13 [electronic resource].
- Published
- [Arlington Va.] : [publisher not identified], 1965.
- Physical Description
- 56 pages : figures
Access Online
- Series
- Contents
- "The Hot-Wire Anemometer" by KOVASZNAY, L. S. G. -- "Some Ways of Improving the Manufacture of Rolling Stock and Raising Its Performance to the Level of World Technology." by CONSTANTINESCU, Vasile -- "A Study of the Mechanized Cultivation of Drift Sand Lands" by RAZSO, I. -- "The Future Development of 50-Cycle Railway Vehicles in Hungary and Abroad" by RATKOVSZKY, F. -- "The Dimensioning of Gas Pipe Lines" by FONO, A. -- "Some Concepts in the Study of Water Counts Transporting Sediments with the Aid of Model Experiments" by BOGARDI, J. L. -- "Model Investigations in the Field of Seepage" by OLLOS, G. -- "Results of Model Experiments for Lowering the Ground Water Level with the Aid of Vacuum Wells" by OLLOS, G., DELI, M., SZOLNOKY, Cs. -- "Non-Synchronous Motors with Single-Axis Rotor" by KOVACS, K. P. -- "New Power Station System for Unit Capacities in the 1000 MW Range" by HELLER, L. -- "A New Displacement Transducer Using Semiconductors" by LORINCZY, A., SZEBENI, P. -- "The Semiconductor Theory for the Sliding Contacts in Electrical Motors" by KUCZOGI, E. -- "Progress in the Construction of Drilling Pipe Protectors as Reflected in Relevant Patents." by LORENT, Alexandru -- "Measuring the Circularity of Machine Components" by HAJDU, Gyorgy -- "Hydraulic Digital Components" by LIGETI, Gyorgy -- "New Television Units for Industry" by L., Gy. -- "A Vast Development Program for the Machine-Building Industry." by MARINESCU, Mihai -- "Analyzing the Hyperbolic Errors Occurring in Angular Profile Milling." by LAZARESCU, Ion, ABRUDAN, Gligor -- "The Bending of Construction Pipes." by RUICAN, Gavrila -- "Electrolytic Sharpening of Tools" by Zubak, Jan -- "Automatic Balancing Machines with Analog Control of Machine Tools Removing Unbalance" by KUHN, L., ROZTOCIL, J. -- "Fitting Standards for Cones" by KONECNY, F. -- "Cablebelt Conveyers" by MATOUSEK, K. -- "Fatal Accidents and Destructions Caused by Overloading Cranes" by NEMEC, B. -- "The Principal Bases for the Placing of Mining Plants in the Case of Amortization with Interest" by ZAMBO, J. -- "Enriching of Coal Sludge by In-Series Connected Hydrocyclones" by TARJAN, G. -- "Economics of Water-Cooled Turbogenerators" by SEIDNER, M. -- "Efforts to Increase Temperatures in Conventional and Nuclear Power Stations" by LEVAI, A. -- "Warming of Wet Mine Air" by TARJAN, I. -- "Plastic Welded Units Used in the Field of Metallic Galvanic Coatings." by POPOVICI, Vladimir, SZENASSY, Alexandru -- "The Problem of Arc Failure in Gas-Filled Incandescent Lamps" by WINTER, E., SZELENYI, T. Z. -- "Utilization of Pyrope Wastes for Preparing Lapping Pastes" by HRICHOVA, R., BAUER, J., KOSMAK, M., VOLAK, I -- "Modern Methods for Designing Helical Springs Subjected To Repeated High Loads" by KISS, Gyozo -- "Mechanical Study of the Friction Coefficient" by KOCZKAS, Endre -- "Some Observations Concerning the Gas Expulsion Process from Diesel Engine Antechambers." by VASILESCU, Calin Adrian -- "Improvement in the Construction of Valves for Rapid Piston Compressors." by COSOROABA, Valentin, OPREA, Nicolae -- "The Calculation of Car Brakes with Inner Floating Shoes." by HILOHI, Calin -- "The Influence of the Kinetics of the Abrasive Mixture on the Shape of Sand Blast Nozzles." by DOBRESCU, Grigore, MUNTEANU, Aurel -- "Designing and Calculating Cylindrical Column Footings" by VARGA, K., VLK, F. -- "The Existence and Uniqueness of the Solution in the Theory of Linear Creep. II. Second Boundary Value Problem" by HLAVACEK, Ivan, PREDELEANU -- "Some Results on the Effect of Variable Layer Thickness in Radial Lattices" by HOFFMEISTER, M. -- "The Calculation of the Velocities of Planetary Gears. Applications of Novel Principles" by BALOGH, A. -- "Various Methods for the Analytical Investigation of the Simplest Types of Planetary-Gear Drives" by TERPLAN, Z. and "Analytical Investigation of Elementary Planetary Drives" by LEVAI, Z. -- "The Permissible Deviation of the Inner Diameter of the Tubes in a Pressure Difference Device for Flow Measurement" by VASY, G. S. -- "The Efficiency of Double-Drive Planetary Gears" by TERPLAN, Z. -- Flow structure in a nozzle throat by Kopystynski, J., Szaniawski, A. -- "Turbulent Wake-Currents Following Heat and Diffusion Sources" by SZABLEWSKI, W. -- "Asymptotic Behavior of Turbulent Expansion in a Vertical Gas Stream Within a Uniform Medium Considering the Archimedes-Type Ascension" by SZABLEWSKI, W. -- Jet in a coaxial free stream. Mean flow pattern by Maczynski, J. -- "Piston Pressur Gauges" by RAJKOVIC, M. -- "An Instrument for Colorimetry" by SIDAK, Zd. -- "Resistance at a Constant Rate of Deformation" by DRASTIK, F. -- "A New Method for Pure Shearing Testing of Steel and Welds." by IOSIPESCU, Nicolae -- "Elasco-Plastic Behavior of a Round Bar Subjected to Axial Force and Torque" by SVED, G., BROOKS, D. S. -- "Simplified Methods of Measuring Stress Distribution in Steam Generator Drums" by PAVLITA, Z. -- "Axisymmetric Stressed States of an Elastic Plate Yielding to Displacement" by PANC, Vladimir -- "The Effect of Shearing Force on the Buckling Load Beyond the Limit of Proportionality" by YLINEN, Arvo -- "Shakedown - New Viewpoint in Structural Analysis" by VASARHELYI, Desi D. -- "Numerical Investigation of Membrane Shells with Rectangular Plan" by SZMODITS, K. -- "Determination of the General Behavior and Driving Stresses in Reinforced Concrete Piles" by SZECHY, K. -- "On Anisotropic Twisted Bars. A Non-Linear Aspect" by OLSZAK, W. -- "Stresses in Cylindrical Shells with Symmetrical Cross Section" by NIKOLSKII, E. H. -- "A Contribution to the Investigation of Concrete Structures with Lattice Girders under Static and Fatigue Conditions" by MORTADA, S. A. -- "Control of the Conditions of Cracking and Deformation in Plates Dimensioned for Maximum Stress" by LEVI, Franco -- "A Simplified Method for Plotting Haigh and/or Smith Graphs" by GILLEMOT, L. -- "The Elastic-Plastic Bending of Circular Rods" by GELEJI, A. -- "Cross Vault Shaped Sectorial Shells with Cantilever-Like Overhanging Free Boundary" by CSONKA, P. -- "On the Calculation of the Deflection of a Membrane" by BARTA, J. -- "On the Effect of Bond on the Rupture Moment in Stressed Concrete Beams" by GOSCHY, B., BALAZS, G. -- "Calculation of Conoid Shells Having a Parabolic Generating Curve" by CSONKA, P. -- "Stability Analysis of Arches with Vertical Load" by ROZSA, M. -- "The Three-Dimensional State of Stress in Concrete" by PALOTAS, L. -- "A Problem in the Experimental Investigation of Dynamic Plastic Traction" by BEDA, Gy. -- "Contribution to the Investigation of Transistory Movements of Rotors on Passing Through the Critical Revolution" by RIPIANU, A., SIRBU, N. -- "On the Calculation of Shallow Shells with Double, Varying Curvature" by KLIMOW, B. -- "Calculation Method for Determining the Dimensions of a Press Container Constructed of Three Parts" by CSIZMADIA, Lajos -- "Calculation of the Rolling Pressure and Torque on Small-Section Rolling Trains" by VOITH, M. -- "On the Internal Edge Beam of Paraboloidal Shells of Revolution Having a Circular Skylight Opening" by CSONKA, P. -- "Calculation of the Strength of the Running Wheels with Radial Blades According to the Beck Method" by PASZTOR, E. -- "Hyperbolic Paraboloidical Shells Over Polygonal Plan" by SZMODITS, K. -- "The Strength of the Concrete and of the Bound Stressing Wires in Stressed Concrete Structures Subjected to Pulsating Forces" by KOZAK, R. -- "A Contribution to the Theory of Rectangular Slabs Supported Along All Four Sides" by SCHWERTNER, A. -- "Determination of Optimum Conditions for Capillary Compensated Hydrostatic Slideways" by HARKANYI, I. -- Large deflections of elastic-creeping circular membrane by Bychawski, Z. -- Dislocation stress fields in α-Fe by Bastecka, J. -- "On the Mean Temperature Difference Between the Two Media in Counter Flow and in Parallel-Flow Heating" by SASVARI, Gy., SEITZ, K. -- "Losses Caused by the Hall Effect and Their Influence on the Efficiency of the Thermal Cycle in MHD Generators" by HALASZ, D., SZENDY, K.
- Report Numbers
- Y 3.J 66:
- Subject(s)
- Note
- Document Date: 12/20/1965.
- Reproduction Note
- Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
- Terms of Use and Reproduction
- Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 21341728