USSR Scientific Abstracts. Metals and Metallurgy. No. 9 [electronic resource].
- [Arlington Va.] : [publisher not identified], 1965.
- Physical Description:
- 340 pages : figures, tables
- USSR scientific abstracts - Metals and metallurgy (1964-1966) ; JPRS-30617
- The effect of vanadium, tungsten and titanium on the properties of a filler metal with an average chromium content by Bagryanskiy, K.V., Kal'yanov, V.N., Kassov, D. S. -- Structural transformations in 36NKhTYu type alloys with molybdenum by Smirnova, A. V., Sol'ts, V. A. -- Effect of the Mn/C ratio on the cold brittleness of steel by Nosyreva, Ye.S., Popov, K. V. -- Non-metallic inclusions in the alloys of the Fe-Ni-Al system used for permanent magnets by Fayvilevich, G. A., Gerasimenko, A. A., Lebedeva, S. B. -- "Nonmetallic Inclusions in Steels with Rare Earth Metal Additions" by RUBENCUHUCK, YU. I., KRYAKOVSKIY, YU. V., TYURIN, YE. I., PONOMAREV, YE. P., VISHKAREV, A. F., YAVOYSKIY, V. I. -- "Investigation of the Structure and Properties of Alloys in the System V₃Si--V₃Sn by SAVITSKII, YE. M., BARON, V.V., YEFIMOV, YU. V., GLADYSHEVSKII, YE. I. -- "Investigation of the LiF--ZrF₄ System by KORENEV, YU. M., MOVOSELOVA, A. V., GLINSKII, K.K., SHORNIKOV, V. V. -- "Hard-Facing Copper Alloys Onto Steel Surfaces" by TIMOFEYEV, V. N., ISAYEV, N. I. -- Liquid carburizing and nitriding in cyanide-free salts by Andrachnikov, Sh. L. -- Bonding -plastics to metals by Belyy, V. A., Rutto, R. A. -- Rolling of bimetal shapes by Yanin, V. Ye. -- Hot rolling of a bimetal sheet with a thick copper coating by Klimov, V. N. -- A study of in-vacuum rolling of steel-titaniun bimetal by Dolzhenkov, F. Ye., Krivonosov, Yu. I. -- A study of optimal boration conditions and the properties of the borated layer in various steels by Kriulin, A. V., Chistoserdova, G. A. -- A study of wear resistance of various borated steels to abrasive friction by Kriulin, A.V., Litavrina, N.D. -- Electrodeposition of magnetically-hard alloys. Part I. Electrodeposition of a cobalt-phosphorus alloy by Bondar', V. V., Mel'nikova, M. M., Polukarov, Yu. M. -- Electrodeposition of magnetically-hard alloys. Part II. Electrodeposition of cobalt-nickel-phosphorus and cobalt-maganese-phosphorus alloys by Bondar', V.V., Mel'nikova, M. M., Polukarov, Yu. M. -- Anode yield in relation to current during the electrolysis of lead in a silicate-chloride melt by Delimarskiy, Yu. K., Kosmatyy, Yu. Ye. -- Equilibrium conditions and mechanism of the hydrogen reduction of solid solutions in the Fe-Cr-O system by Balakirev, V. F., Simonova, M. I., Chufarov, G. I. -- Study of the precipitation of uranium concentrate from ionite eluates by Domanus, S. -- "Mathematical Analog of the Roasting of Pyrite in a Fluidized Bed" by D'YACHKO, A. G., RUL'NOVA, A. Z. -- "Study of the Extraction of Iron and Silver Impurities from Germanium Using Radioactive Isotopes" by GLINCHUK, K. D., TKACH, K. D. -- "On the Question of Roasting Molybdenum Concentrates to Extract Rare Metals" by MELKONYA, V. A., KAZAKOV, A. S., GURGENYAN, S. V. -- "Mathematic Analog of Roasting Nickel Matte in a Fluidized Bed" by BRYUKVIN, V. A. -- "Mathematical Analog for Roasting a Molybdenum Concentrate in a Fluidized Bed" by RUL'NOVA, A. Z. -- "Development of a Process for Concentration of Unweathered Pyrochlore-Zirconium Ores" by ROSSOVSKIY, S. N., URUSOVA, S. M. -- "On the Theory of Electrolytic Refining of Metals in Melts Using Liquid Electrodes" by BAYMAKOV, YU. V. -- "Effect of Impurities on the Electrolytic Process of Magnesium Chloride and Carnallite" by FRANTAS'YEV, N. A. -- "Improvement in the Technology of Magnesium Chloride Electrolysis" by MUZHZHAVLEV, K. D., LEBEDEV, O. A., FRANTAS'YEV, N. A., OLYUNIN, G. V., DOLGIKH, T. K., SHEKA, T. S. -- The theory of oxidizing refining of antimony from iron with alkaline fluxes by Rozlovskiy, A. A. -- A study of the conditions for the unsealing of primary gallium concentrate by lime at high temperatures and pressures by Khasiyeva, S.A., Zelikman, A.N., Ivanova, R.V.
Decreasing the number of scabs and nonmetallic inclusions in Kh18N9TL steel castings by Gulyayev, B.B., Kuzin, A.V., Kaplun, R.I. -- The quality of semicontinuously cast nickel ingots by Gnezdilov, I.A., Militsyn, K.N. -- "New Non-Stearing Pattern Compositions for Investment Casting" by LAKEYEV, A. S. -- Experience in the preparation of reinforced castings from aluminum alloys by Budnevich, V. A. -- Obtaining high-grade castings from magnesium alloys by filtering the liquid metal by Benderskiy, L. S, By*strov, A. M., Vasil'yev, N. V., Gorelikov, V. D., Danilov, V. N., Divinskiy, Yu. L., Yermolayev, V. A., Kosyakov, V. M., Fedorov, V. V. -- Use of an electromagnetic pump in the preparatory casting of magnesium alloys by Rogozinskiy, A.A., Makarov, G.S., Mishchenko, V.D., Tarary*shkin, V.I. -- Effect of speed of pressure casting on the casting quality by Gorskiy, A. I., Akivis, D. R., Ivanov-Emin, Ye. B. -- Improvement in the equipment for low pressure casting by Bedel', V. K. -- Effect of holding the molten metal under vacuum on properties of chromium-nickel alloy by Gagin, S. D. -- Measuring the solidification period in a rotating permanent mold during centrifugal casting of hollow steel piping billets by Rulla, N.V. -- Conditions for the formation of gas porosity in titanium castings by Magnitskiy, O. N. -- The effect of a gaseous medium during melting and teeming on the quality of cast chromium by Kaplunovskiy, G. A., Kukkonen, E. Ya., Demidova, A. A., Magnitskiy, O. N., Gulyayev, B. B. -- "Effect of the Secondary Phase on the Structural Mechanism of Austenite Grain Formation" by LIPCHIN, N. N. -- Characteristics of high-temperature decomposition in magnico alloys by Povolotskiy, Ye. G., Mikheyev, N. I., Dovgalevskiy, Ya. M. -- Heat treatment of YuNDK35T5 alloy by Baytina, V. K., Vlaskina, K. I., Dovgalevskiy, Ya. M. -- Aging of N41KhTa alloy by Libman, N. B., Khodakova, T. A. -- Elimination of brittleness of ferritic-austenitic steels by Sokol, I. Ya. -- The effect of annealing on the properties of cold-worked Cu-Al alloys prepared by the sintering method by Savitskiy, K. V., Itin, V. I., Kozlov, Yu. I., Kulikov, V. A. -- Investigation of the strain aging of iron by the internal-friction method by Suvorova, S.O., Sarrak, V.I., Entin, R.I. -- The recrystallization and aging of a magnesium aluminum alloy by Polesya, A. F. -- The effect of preliminary plastic deformation on the decomposition of austenite by Gulyayev, A. P., Kashnikova, M. L. -- Research on structural steel with improved strength -- "Structure Improvement of Cast High-Speed Steels" by YEVTYUSHKIN, YU. A., LIKHOSHERSTOV, D. M. -- "Carbon in High-Chromium, Low-Alloy, Cast High-Speed Steel" by YEROFEYEV, N. A. -- Heating of articles in a fluidized bed by Varygin, N.N., Martyuskin, I.G. -- Residual stresses in the surface layers of heat-resistant alloys subjected to diffusion-saturation with metals by Dubinin, G. N., Gribovski, L. -- Comments on the irreversible change in form of pure metals during cyclic heat treatment by Dekhtyar, I. Ya., Madatova, E.G. -- Investigation of structural changes with a biphasic decomposition mechanism in Ni- Be alloys by Larikov, L. N., Petrov, Yu. N., Borimskaya, S. T. -- Roentgenographic study of an In - Sn alloy melt with a eutectic composition by Romanova, A. V., Kuchak, G. M. -- Experimental methods of investigating the kinetics of recrystallization in metals by Larikov, L. N., Zasimchuk, Ye. E. -- "Possible Use of Thorium in Fast Power Reactors" by LEYPUNSKIY, A. I., KAZACHKOVSKIY, O. D., SHIKHOV, S. B., MUROGOV, V. M. -- "Mutual Relationship Between the Texture and Radiation Growth of Uranium Rods" by IVANOV, V. YE., ZELENSKIY, V. F., KUNCHENKO, V. V., ROYENKO, N. M., STUKALOV, A. I., VOROB'YEV, M.A., AZARENKO, A. V. -- "New Stainless Steel" -- "Organization of a Section for Industrial Production of Fabricated Nonferrous Tubing" -- EI893 alloy for gas-turbine blades by Getsov, L. B., Shovkun, V. Ye., Filatova, M. A. -- Problems involved in the quest for thermoelectrode oxidation-resistant alloys at service temperatures up to 2000 C by Aleksakhin, I. A., Lepin, I. R., Lapp, G. B., Bragin, B. K.
Gas-impermeable protective thermocouple casings made of zirconium boride by Kislyy, P.S., Kuzenkova, M.A. -- Corrosion resistant pipes of Kh8VF for furnaces and connecting piping in oil refineries by Zalesskaya, Ye. B., Vol'fson, S. I. -- Metallo plastic construction material by Al'shits, I. Ya., Zel'tser, Yu. G., Polyakova, K. K., Makushenko, B. I., Shorina, P. D. -- Rubber-metal parts in metallurgical equipment by Melamed, Ch. L., Blokh, G. A., Stryuk, V. I., Moiseyev, Ye. P. -- Some peculiarities of the creep in whiskers by Serebryakov, A. V., Kostyuk, V. G., Ziling, K. K. -- Behavior of whisker crystals at near-melting temperatures by Ziling, K. K. -- Investigation of the properties of metal of industrial EP-17 steel pipes by Fantayeva, M. I., Tykochinskaya, T. V. -- Brittleness in permendur type alloys by Karmanova, Ye. G., Beloruchev, L. V., Yafayeva, S. P., Kuleshova, V. D. -- Effect of loading technique on structure and mechanical properties of the D16M alloy by Sogrishin, Yu. P., Tikhonov, L. V., Chernis, T. Sh. -- Thermomechanical treatment of structural steels by Kurmanov, M. I., Dryukova, I. N. -- Effect of cyclic plastic deformation on metal fatigue under conditions of homogeneous and nonhomogeneous agrees states by Pisarenko, G. S., Troshchenko, V. T., Bugay, V. I. -- The strength of vapor-deposited nickel and iron films by PalatniK, L. S., Il'inskiy, A. I., Ravlik, A. G. -- Mechanical properties of electrowelded Kh18N10T steel pipe by Dmitriyev, V.D., Shevakin, Yu. F. -- Internal friction, shear modulus, and strength of copper whiskers by Postnikov, V. S., Ammer, S. A., Belyayev, A. M. -- "Some Problems of Metal and Alloy Strength" by VINAROV, S. M. -- Effect of changing temperature regimes on fatigue strength by Mal'kevich, A. V., Marinets, T. K., Rakhman, B. M. -- Investigation of the plastic properties of alloys of chromium and the transition metals by Butylenko, A. K., Gridnev, V. N. -- Ductility of aluminum-chromium alloys by Vostryakov, A. A., Vatolin, N. A., Ignatenko, G. F. -- Effect of metal macrostructure on contact endurance and durability of roller and ball bearings by Rauzin, Ya. R. -- Investigation of contact fatigue in ShKhl5 steel as a function of structure of the surface layer modified by grinding by Grozin, B. D., Nazarenko, G. T. -- Contact fatigue strength of ShKh15 steel as a function of structural transformations in the surface layer caused by grinding by Nazarenko, G. T., Panchenko, N. P. -- The nature of plastic deformation at superhigh velocities by Kortenski, Khr., Buchvarov, Iv. -- Brittle strength of alloy steel by Serensen, S. V., Stepnov, M. N., Kogayev, V. P., Giatsintov, Ye. V. -- Laws of crack development and failure of frame steel during cyclic loading by Serensen, S. V., Makhutov, N. A. -- Influence of loading conditions on the failure of low-alloy frame steel by Makhutov, N. A. -- The effect of mechanical inhomogeneity on the fatigue strength of weld joints by Kudryavtsev, P.I., Gel'man, A.S. -- Mechanical strength of ferritic-austenitic 25-5 type metal by Zaks, I. A. -- Thermomagnetic treatment of bearing steels by Konter, L. Ya., Zakharova, V. L. -- Hot cracking of alloys of the system magnesium-zinc-zirconium by Novik, F. S., Novikov, I. I., Tikhonova, V. V., Korol'kov, G. A. -- The effect of electrical preheating on the mechanical properties, stress relaxation,and creep of high-strength wire rod by Chernashkin, V. G., Livchak, T. N. -- Work required to produce cracks when deforming alloys in the solid-liquid state by Novikov, I.I., Novik, F.S. -- Durability of molds and stamps during pressure casting and stamping of of liquid steel by Kudrin, N. A., Bidulya, P. N. -- "Method for Producing Seamless Tubes" by OSADCHIY, V. YA., KOROLEV, M. V., GETIYA, I. G., LENYASHIN, V. B. -- "Determination of Feed Force During Cold Rolling of Thin-Wall Tubing" by VERDEREVSKIY, V. A., ADAMIYA, R. SH. -- Study of the technological parameters of rolling the skirt of a cylindrical stock into a sphere by Kaporovich, V. G. -- The forging of long, hollow cylinders from alloyed steel by Sidorov, N. Ye.
Metal flow in the initial stage of extruding D16 steel pipes with exterior or interior aluminum cladding by Gil'dengorn, M.S. -- Use of lubricants in hot rolling of steel by Chekmarev, A. P., Grudev, A. P., Zil'berg, Yu. V. -- Manufacture of seamless, thin-walled pipes and casings by Solov'yev, V. P., Basyuk, S. T., Kuleshov, M. Ya. -- A blasting installation for investigating ultrahigh speed cutting by Grabin, V.G., Pudurayev, V. N., Korotkevich, Yu. N. -- Precautions during explosive stamping of parts by Bobkov, A.S. -- Thermomechanical treatment of stress concentrators by rolling with rollers by Chayevskiy, M.I., Shatinskiy, V.F., Popovich, V.V. -- Hot rolling of pipes on KhPT mills by Miroshnichenko, F. S. -- Cutting of heated metals by Borisov, B. Ya., Kul'baka, Yu. S., Tsokur, A. K. -- Friction and wear during hot deformation of metals by chrome plated tools by Dovnar, S.A., Chepa, P.A. -- Mechanical strengthening of gear teeth and a study of fatigue strength by Reznikova, N.P. -- Experimental forging of molybdenum by Seredin, P.I., Seleznev, L. A., Kalinin, K.K. -- Effect of rolling in a vacuum on metal properties by Smirnov, V. S., Amonenko, V. M., Tron', A. S., Aleksandrov, A. A. -- Drilling of heat resistant steel EI787 by Shaterik, M. A. -- Selection of cooling methods for various machining operations on stainless and heat resistant materials by Zaytsev, V.M. -- Effect of processing factors on the mechanical properties of the seam in tongue-and-groove die extrusion of D-l alloy by Bogdanov, Ye. S., Yanskiy, S.N., Penkov, V.M., Shchegolevatykh, V.D. -- Analysis of the effects of processing factors on the strength of seams produced while extruding aluminum by Bogdanov, Ye. S., Yanskiy, S.N., Penkov, V.M., Shchegolevatykh, V.D. -- Factors of impurity-level degeneracy and analysis of electrical properties of germanium with gold by Ostroborodova, V. V. -- Radiative recombination in crystals of germanium with a large dislocation density by Gippius, A. A., Vavilov, V. S., Goncharov, L. A., Murashov, M. S. -- The redistribution of dislocations in a molybdenum single crystal by annealing by Bykov, V. N., Rudenko, V. A., Zakharova, M. I. -- A study of the mobility of Ag, Al, Mn and Ge impurity atoms in liquid tin by Golotyuk, F. P., Kuz'menko, P. P., Khar'kov, Ye. I. -- The effect of reversing the preferential flow of vacancies during reciprocal diffusion in crystal bodies by Geguzin, Ya. Ye., Paritskaya, L. N. -- The nature of the distribution of atoms in complex melted eutectic alloys by Dutchak, Ya. I., Klym, N. M. -- A neutron-structure analysis of Kh25T steel by Lyashchenko, B. G., Okenko, A. P. -- Neodymium tellurides by Yarembash, Ye. I., Yeliseyev, A. A., Zinchenko, K. A. -- Certain problems of metallochemistry and new inorganic materials by Kornilov, I. I. -- "Plasma Vibrations in Single Crystal Metal Films" by BEGIASHVILI, G. A. -- Viscosity of liquid dilute solutions of lanthanum and cerium in iron by Romanov, A. A., Kochegarov, V.G. -- Acoustic experiments on liquid Sb-Zn alloys by Kazakov, N. B., Pronin, L. A., Filippov, S. I. -- Effect of prior contact between liquid and solid metal on its adsorptive weakening by Flegontova, N. I., Summ, B. D., Goryunov, Yu. V. -- An experimental determination of the coefficients of absorption of metallic filaments by Perov, S.P., Rusina, V.Ya. -- The asymmetry of intersolubility in metallic systems by Kornilov, I. I. -- The role of thermal phenomena in collision of metal bodies by Belyakov, L. V., Valitskiy, V. P., Zlatin, N. A. -- Investigating the formation of semiconductive films of tetracyanoethylene polymer complex on metals by measuring the voltage potential by Boguslavaskiy, L.I. -- Evaluation of the atomizing quality obtained in ultrasonic dispersion of fluids and melts by Popov, V. F. -- Investigation into the properties of pure and lithium- or iron-alloyed nickel oxide, obtained by the decomposition of nitrates by Belyanski, A., Deren', G., Vol'ter, M. -- Optical determination of the blackness coefficient of certain heat-resistant alloys by Kly*pin, A. A.
Binding forces in Omega-phases by Rafalovs'kyy, V. A., Trefilov, V. I. -- Zener relaxation effect in homogeneous Ag-Mg solid solutions by Shtrakhman, K. M. -- Domain structure and anisotropy of thin ferromagnetic films by Buravikhin, V. A., Shishkov, A. G. -- Combined solubility of iron and manganese in aluminum by Varivoda, I. Kh., Polesya, A. F. -- Comprehensive investigation of thin films of cadmium telluride containing elements of the first and third groups as impurities. II. The impurity state of thin films of cadmium telluride doped with copper by Tolutis, V.B.(Tolutis, V.), Shimulite, Ye. A. (Simulyte, E.) -- On the modulated periodic structure in magnetic alloys based on Fe-Ni-Al with cubic body-centered lattice by Tyapkin, Yu. D., Yerosheskova-Lukanina, I. G. -- The electromechanical effect in covalent crystals as a function of temperature by Mil'man, Yu. V., Trefilov, V. I., Khomenko, G. Ye. -- Nickel diffusion in niobium by Yatsenko, T. K., Chernaya, L. F. -- Electron microscope observation of the domain structure in thin iron films by Kaverina, S. N., Levin, G. I. -- A method for growing fluorite single crystals. Class 12, No. 169063 by Anikin, I. N., Butuzov, V. P., Shushkanov, A. D. -- A method for protecting metals from atmospheric corrosion with the help of inhibitors founded on quaternary ammonium bases. Class 48, No. 168577 by Golyanitskiy, O. I. -- A method for diffusional saturation of binary and tertiary metallic systems Class 48, No. 168574 by Griboyedov, Yu. N., Yunts, B. I. -- Apparatus for rapid measuring of the thermal, conductivity coefficient of materials in the temperature range of -150 to +400C, Class 42, No. 168500 by Platunov, Ye. S., Kurepin, V. V. -- A method for decanting liquid metal from a slag-lined furnace with consumable electrodes. Class 31, No. 168403 by Glazunov, S. G., Khromov, A. M., Yasinskiy, K. K., Norin, P. V., Ivanov, A. V., Khrushchevich, L. A., Prostov, I. A. -- A method for resistance welding pipes with a helical seam. Class 21, No. 168389 by Zhukovskiy, B. D., Zinov'yev, A. G. -- A method for producing alkali halide crystals. Class 12, No. 168262 by Nadgornyy, E. M., Stepanov, A. V. -- A cutting fluid for hot finishing of metals. Class 23, No. 167940 by Vinichenko, G. G., Tarasenko, V. A., Shtan'ko, V. M., Panyushkin, A. V., Bobrov, V. G., Komogorov, N. N. -- A coolant for cold finishing of metals. Class 23, No. 167938 by Timofeyev, P. V., Karnauk, A. M. -- A cutting compound for cold finishing of metals. Class 23, No. 167939 by Kutsenko, A. I., Burinova, L. I., Moshkin, P. A., Volkov, I. S., Nikolayeva, V. M., Mikhaylov, A. I., Korneyev, V. I., Rogachev, L. K., Manteyfel', V. I., Gapeyeva, Z. Ya. -- A method of growing silicon carbide single crystals. Class 12, No. 167836 by Lymar', G. F., Polikanov, Yu. V., Medvedev, S. A. -- A means of revealing non-fusion and the sizes of the melted zone of spot-welded and bead-welded joints without destroying the construction. Class 42, No. 167668 by Orlov, B. D., Dmitriyev, Yu. V., Zaytsev, M. P., Marchenko, A. L. -- An apparatus for testing the tendency of metal in the zone adjacent to a weld to form hot fractures. Class 42, No. 167659 by Russiyan, A. V., Matsnev, E. P., Kireyeva, T. S., Shorshorov, M. Kh., Sakharnov, A. A. -- Attachment for machines used in fatigue testing of rotating objects. Class 42, No. 167342 by Kuslitskiy, A. B., Ryabov, B. F. -- A testing device for impact strength. Class 42, No. 167339 by Raskurazhev, B. N., Spirina, S. G. -- A method for arc welding of sheet metal products. Class 21, No. 167267 by Petrov, A. V., Slavin, G. A. -- A method for controlling the quality of welded seams of parts (after removing the reinforcing beads). Class 42, No. 167063 by Ryzhov-Nikonov, V. I., Yermolov, I. N. -- Method of submerged multiarc welding with oscillation of the leading arc. Class 21, No. 167266 by Mandal'berg, S. L. -- Apparatus for automatic welding of butt and corner seams on large Class 21, No. 166983 by Chvertko, A. I., Krutelev, V. I., Savenko, S. S., Kovlyan, G. A.
Method of automatic welding circular, fixed-position Joints. Class 21, No. 166981 by Kochanovskiy, N. Ya., Feder, Ye. S., Katler, S. M. -- High-frequency plasma furnace. Class 21, No. 166411 by Donskoy, A. V., Dresvin, S. V., Ratnikov, D. G. -- Capacitor discharge resistance welding machine. Class 21, No. 166980 by Zaychik, L. V., Komarov, A. I. -- Method for manufacturing tubes of varying cross section, and the apparatus for implementing this method. Class 7, No. 89338 by Tselikov, A. I., Levin, Ye. I., Livshits, T. A. -- Method for continuous pouring of metal into ingots and the apparatus for implementing this method. Class 31, No. 87153 by Rutes, V. S., Beylin, M. S. -- Stand for cold rolling of pipes. Class 7, 86387 by Doroshev, M. A. -- Production of metal microstrips and microtubes. Class 31, No. 84733 by Ulitovskiy, A. V., Averin, N. M. -- Machine for tube slush casting. Class 31, No. 83813 by Veynik, A. I., Novikov, P. G., Khachaturov, S. S. -- A method for manufacturing metal-clad articles from light alloys. Class 31, No. 83274 by Matveyev, B. I., Kalugin, V. G. -- Electrical resistivity and thermal emf of La-Ce, La-Pr, and Pr-Nd alloys by Vadernikov, M. V., Markova, I. A., Meshkova, G. N. -- Magnetic susceptibility of chromium silicides by Radovskiy, I. Z., Shubina, T. S., Gel'd, P. V., Sidorenko, F. A. -- Effect of irradiation with neutrons on the ferritic-pearlitic structure of iron-carbon alloys by Markovskiy, Ye. A., Krasnoshchekov, M. M., Kochegura, N. M. -- "The Superconductivity of Lanthanum Films" by ARTEMENKO, I. A., VOYTOVICH, I. D. -- On the problem of determining the components of contact thermal resistance by Khizhnyak, P. Ye. -- Magnetic susceptibility of zinc telluride by Tovstyuk, K. S., Savyts'kyy, A. V. (Savitskiy, A. V.) -- "Residual temperature Changes in Permalloy Alloys" by NADRIYEVSKIY, YE. A., BONDARUK, B. L. -- The nature of the electrical conductivity of mixed oxides in the bismuth oxide - lead oxide and bismuth oxide - molybdenum oxide systems by Yushina, L. D., Pal'guyev, S. F. -- Effects of radiation in gas media on the Mechanical properties of steel by Teterskiy, V. A., Soshko, A. I., Ty*nny*y, A. N., Karpenko, G. V. -- Effect of monovalent impurity on the low-temperature electric conductivity of alkali-halide crystals by Pershits, Ya. N. -- Nitriding of aluminum powder under pressure by Samsonov, G. V., Repkin, Yu. D. -- Manufacturing porous titanium tubes by Zhevnovatyy, A. I., Shenberg, G. F. -- On the relationship between strength and hardness in tungsten and molybdenum over a wide temperature range by Borisenko, V. A. -- On similarity theory in studying the thermal stability of brittle cermets by Tret'yachenko, G. N. -- "Effect of Chemical Composition on the Structure and Electrical and Thermal Properties of Vanadium Monocarbide in the Homogeneous Range" by NESHPOR, V. S., ORDAN'YAN, S. S. -- Influence of heat treatment on the properties of porous stainless steel by Solonin, S.M., Globa, L.V. -- Sintered porous materials from stainless steel by Andriyevskiy, R.A., Pugin, V.S., Fedorchenko, I.M., Teverovskiy, B.Z. -- Mechanical properties of cermet steels obtained by sintering mixtures of iron and graphite powders by Fedorchenko, I.M., Chayka, B.I. -- New method of determining strains in cast and sintered materials by Bugay, V.I. -- Plasma arc in powder metallurgy by Krasnov, A.N., Sleptsov, V.M. -- Use of porous cermet partitions for localizing a flame by Lev, M.B., Pavlovskaya, Ye. I. -- Vacuum diffusion welding of metal-like carbides to refractory metals by Burykina, A.L., Yevtushenko, O.V. -- On the role of secondary distortions during the compacting processes in pressing and recrystallization during the sintering of refractory metals by Alekseyeva, F.N., Matyushenko, R.S., Rakovskiy, V.S., Silayev, A.F. -- The interaction of refractory compounds and molten metal by Samsonov, G. V., Yasinskaya, G. A. -- Certain factors determining the type of phase diagram in binary systems formed by refractory oxides by Tresvyatskiy, S.G., Lopato, L.M.
The strength of chromium carbide alloys by Klimenko, V.N. -- Investigation of the homogeneity region of titanium nitride by method of x-ray spectroscopy by Zhurakovskiy, Ye. A., Dzeganovskiy, V. P. -- Characteristics of the production process of compact parts and mechanical properties of certain rare metal hexaborides by Arabey, B.G., Shtrom, Ye.N., Lapitskiy, Yu.A. -- Antifriction material on a steel swarf base by Stepanov, S. I. -- Method of activating sintering by using chlorine by Sivachek, M. -- Experimental production and assessment of grain size in coarse grained tungsten powders by Klyachko, L. I., Semenova, M. P., Besolova, N. K. -- Temperature control of converter metal by means of zirconium boride cermet tips by Serdyuk, S.M., Gul'yev, G.F., Kozin, G.N., Svet, A.L. -- Rolling pressure during powder rolling of bands by Severdenko, V. P., Lozhechnikov, Ye. B. -- Preparation of thermoelement branches by hot pressing through a die by Smirnov, V. S., Alekseyev, A. M. -- Physicochemical principles of the behavior of rhenium during the oxidation roasting of molybdenite concentrates by Zelikman, A. N., Petrov, V. M., Yegorychev, K. N. -- Physicochemical principles of the hydrometallurgical method of rhenium refininf by Postnikova, S. V., Bibikova, V. I., Fedorov, P. I. -- Recovery of rhenium from copper concentrates by alkaline leaching by Lebedev, K. B., Ageyev, S. A., Okhotnikova, N. A., Yermilov, V. V., Raimbekov, Ye. S., Filimonov, M. I. -- Recovery of rhenium from lean solutions by ion exchange and sorption methods by Bibikova, V. I., Il'chenko, V. V., Semenova, Z. A. -- Ion-exchange separation of rhenium from molybdenum, selenium, and tellurium in a strongly alkaline medium on anion exchange resins of varying basicity by Darbinyan, M. V., Gaybakyan, D. S. -- A study of the conditions for the recovery of rhenium from lean solutions by adsorption on activated charcoal by Lebedev, K. B., Tyurekhodzhayeva, T. Sh. -- "The Influence of Certain Impurities on the Process of Adsorption of Rhenium From an Activated Carbon Solution" by OKHOTNIKOVA, N. A., YERMILOV, V. V., RAIMBEKOV, YE. S., FILIMONOV, M. I. -- Extraction method of obtaining pure ammonium perrhenate by Bibikova, V.I., Marunova, K.V., Karyakin, A.V., Petrov, A.V. -- "Methods of Producing Rhenium" by ZELIKMAN, A. N. -- "Survey of Means of Recovering Rhenium From the Gas Phase" by SAVRAYEV, V. P. -- "Recovery of Rhenium From Gases Produced in the Treatment of Sulfide, Rhenium-Containing Raw Materials" by PEYSAKHOV, I. L. -- Rhenium carbonyl and the preparation of rhenium metal from the gas phase by Ginzburg, A.A. -- Electrodeposition of high-purity rhenium by Sominskaya, Z.M., Nikitina, A.A. -- Rhenium and Rhenium-alloy coatings by Sominskaya, Z. M., Nikitina, A. A. -- Coating of refractory metals with rhenium by the thermal dissociation of rhenium chlorides by Zelikman, A.N., Baryshnikov, N.V. -- Influence of oxygen on the fine structure, deformation mechanism, and physicomechanical properties of rhenium metal by Savitskiy, Ye. M., Chuprikov, G.Ye. -- Preparation of ductile rhenium by Pavlova, Ye. I. -- Thermomechanical treatment of rhenium by Karavaytsev, V. I. -- Behavior of certain impurities in the course of the production of massive malleable rhenium by Koneva, K.G., Abashin, G.I. -- Winning compact ductile rhenium from ammonium perrhenate by Abashin, G. I. -- Development of research on rhenium alloys by Tylkina, M.A., Savitskiy, Ye. M. -- Ternary tungsten-molybdenum-rhenium alloys by Povarova, K. B., Tylkina, M. A., Savitskiy, Ye. M. -- Physicochemical interaction of rhenium with elements of the platinum group, and the properties of certain alloys (a review) by Tylkina, M.A., Tsyganova, I.A., Polyakova, V.P. -- Xray structural analysis of alloys of the system W - Re - C by Kuz'ma, Yu. B., Lakh. V.I., Stadnyk, B.I., Gladyshevskiy, Ye. I. -- X-ray structural study of the alloys of rhenium with manganese and iron by Shekhtman, V. Sh. -- Phase analysis of the ternary systems Re - Fe (Co, Ni) - Si by Gladyshevskiy, Ye. I., Kuz'ma, Yu. B.
X-ray structural study of alloys of the system Mo - Re - C by Borusevich, L.K., Gladyshevskiy, Ye. I. -- Investigation of the interaction of beryllium with rhenium by Nagorskaya, N. D., Simanov, Yu. P., Nikolayeva, V. V., Novoselova, A. V., Fridlyander, I. N., Yatsenko, K. P., Savostin, A. P. -- Crystal structure of certain binary intermetallic compounds of rhenium by Kripyakevich, P. I., Kuz'ma, Yu. B., Protasov, V. S. -- Synthesis and properties of some refractory rhenium compounds by Samsonov, G. V., Obolonchik, V. A., Neshpor, V. S., Verkhoglyadova, T. S., Vereykina, L. L., Mikhlina, T. I. -- The use of rhenium as a base material for oxide cathodes by Kuleshova, T.F., Nikonov, B.P. -- The use of rhenium and its alloys in electronic vacuum devices by Kiselev, A.B., Nikonov, B.P. -- Use of rhenium in alloys of high hardness and strength by Sol'ts, V. A., Bedretdinova, M. A. -- Physicomechanical properties of molybdenum-rhenium alloys in microsections by Timofeyeva, Z.A., Petrova, T.G. -- Alloying of the metal of molybdenum welds with rhenium by D'yachenko, V. V., Morozov, B. P. -- Development and industrial adoption of thermocouples for high-temperature measurements by Danishevskiy, S. K., Gurevich, A. M., Smirnova, N. I., Ipatova, S. I., Pavlova, Ye. I. -- Types of thermocouples from alloys of the tungsten - rhenium system and calibration of the VR-5/20 thermocouple by Kocherzhinskiy, Yu. A., Kobzenko, G. F., Pan, V. M., Sviridenko, V. K., Yupko, L. M. -- Stability of the thermoelectromotive force of tungsten-rhenium thermocouples by Lapp, G. B., Popova, D. I. -- Thermochemical treatment of rhenium by Minkevich, A. N., Tylkina, M. A., Rastorguyev, L. N., Rodionova, G. P. -- "The Spectrophotometric Determination of Rhenium" by BROISOV, L. V., RYABCHIKOV, D. I. -- Determination of rhenium in alloys, concentrates, and ores by means of the EDE-10 anion exchange resin by Borisova, L. V., Yun Gen Sen -- Preparation, properties and prospective uses of rare earth metal selenides by Obolonchik, V.A., Lashkarev, G.V. -- Adsorption of hydrogen and oxygen by zinc selenide by Maydanovskaya, L. G., Kirovskaya, I. A. -- New properties of high-purity selenium by Mekhtiyeva, S. I., Aliyev, G. M., Abdinov, D. Sh. -- Diffusion and solubility of selenium in hot tin by Vasilenko, T. V., Khar'kov, Ye. I. -- Growing of selenium single crystals by Aliyev, G. M., Larionkina, L. S., Dzhalilov, N. A. -- Paramagnetic resonance in selenium by Abdullayev, G. B., Ibragimov, N. I., Mamedov, Sh. V., Dzhuvarly, T. Ch., Aliyev, G. M. -- Interaction of the selenides of samarium and gallium by Efendiyev, G.Kh., Karayev, Z.Sh., Nasibov, I.O. -- "Concentrating Water Samples to Determine Tritium Content" by ZEL'VENSKIY, YA. D., NIKOLAYEV, D. A., TATARINSKIY, V. S., SHALYGIN, V. A. -- "Study of the Wear of Piston Rings Made of High-Strength Cast Iron" by TIKHONOVICH, V. I. -- Rapid amalgam polarographic determination of antimony impurity in high-purity tin by Zaichko, L. F., Yankauskas, V. F., Zakharov, M. S. -- Luminescent defectoscopy of porous materials by Karyakin, A. V., Borovikov, A. S., D'yakov, L. A. -- Determining the grain size of artificial graphite filler by thermal oxidation by Oshchepkova, N. V., Sukhorukov, I. F., Bochagov, Yu. N. -- Countercurrent, box-type, extraction apparatus by Korpusov, G.V., Tsylov, Yu. A. -- The use of mass spectrometry for studying refractory compounds by Gordiyenko, S. P., Fesenko, V. V. -- MKP-Control devices for load programing during testing by Vlasov, Yu. V. -- Unit for crystallization of alloys at high cooling rates by Salli, I. V., Limina, L. P. -- Extraction and photometric determination of scandium in rare earth preparations by Ryabchikov, D. I., Savvin, S. B., Dedkov, Yu. M. -- Fluorescent determination of aluminum microimpurity in high purity cadmium salts by Lebed', N. B., Pantaler, R. P. -- Reverberation method for inspecting metallic structures by Zarochentsev, G. V., Yushkevich, I. N. -- The method of buildup amalgam polarography. The polarographic behavior of germanium by Stepanova, O.S., Zakharov, M.S., Trushina, L.F.
Use of the autoradiographic method for the study of boundary zones in bimetals by Gol'din, M. L., Krivonosov, Yu. I., Kovalev, G. N., Dolzhenkov, F. Ye., Tobol'skiy, M. B. -- Determination of residual stresses on a photomechanical apparatus by Gribovski, L. -- Radioactivated determination of traces of gold by using substoichiometric separation by Alimarin, I. P., Perezhogin, G. A. -- A method for the simultaneous observation of stresses and strains in crystalline substances in the elastic and plastic regions by Markovskiy, V. Yu., Polukhin, P.I., Shaskol'skaya, M.P. -- Magnetoelectric thickness gage-ferritometer TF-1 by Bobrov, V. A. -- Instrument for measuring rapidly changing temperatures by London, G. Ye. -- Thermomechanical treatment of carbon structural steel by Pokhmurskiy, V. I., Karpenko, G. V. -- Recrystallization of 55KhGR steel during high-temperature thermomechanical treatment by Bron, D. I., Levites, I. I., Shashina, M. N. -- Influence of multiple repetition of the yield process with intermediate aging on the strength of metals with body centered cubic lattice by Oding, I. A., Ivanova, V. S., Gordiyenko, L. K. -- Thermovibromechanical hardening of hydraulic pump vanes by Vyval', I. P., Baran, M. I., Saliternik, I. G. -- Influence of thermomechanical treatment on the mechanical properties of steels 45, 60S2 and ShKh15 by Pokhmurskiy, V. I. -- Effect of the conditions of thermomechanical treatment on the corrosion resistance of steels by Pokhmurskiy, V. I., Karpenko, G. V. -- "Flow of Liquid Titanium on Graphite" by YELYUTIN, V. P., KOSTIKOV, V. I., MAURAKH, M. A. -- "Effect of Titanium on the Surface Properties of Iron and Iron-Carbon Alloys" by SMIRNOV, L. A., POPEL', S. I., TSAREVSKIY, B. V. -- Protection of titanium alloys against high-temperature gas corrosion by Pan'kov, Yu. A., Golub, O. P. -- [Title illegible] by Glazova, V. V. -- Influence of humidifying titanium sponge on ingot hardness by Garmata, V.A., Kramnik, V. Yu., Arutyunov, E.A., Nazarova, V.I. -- Ignitability of alloys of the zirconium-titanium system by Ioffe, V.G. -- The mechanism and kinetics of the formation of metastable phases in Ti-Alloys by Fedotov, S. G. -- Study of titanium rich alloys of the titanium-aluminum system by Tavadze, L. F. -- "Radiographic Investigation of Niobium Distribution in the Heat-Affected Zone of Type Kh18N10B Steel" by PETROV, G. L., IGNATOV, V. A. -- "Stabilization of Electron-Beam Welding Process" by PODOLA, N. V., SALAN, V. I., OBOLONSKIY, A. P., LOKSHIN, V. YE. -- The effect of non-uniformity in the strength characteristics of welded joint on their tendency toward local breakdown by Lyubavskiy, K. V., Morozov, B. I., Nikitin, Yu. M., Timofeyev, M. M. -- Simulating the white stripe in welded joints by Fomina, O. P., Gavranek, V. V., D'yachenko, S. S., Seleznev, A. G., German, S. I. -- System for stabilizing the arc length in DC argon-arc welding with a nonfusible electrode by Stolbov, Yu. I., Vladimirov, V. V., Barutkin, F. Ye. -- Instability of a direct current low-ampere arc by Varlomov, I. V. -- Diffusion welding in carbon dioxide gas by Slepukha, V. T. -- Welding of an aluminum ventilation duct by Poritskiy, M. P., Steblovskiy, B. A., Naroditskiy, B. I. -- H-f welding of longitudinal joints in large-diameter steel pipes by Kirdo, I. V., Skachko, Yu. N., Polukhin, V. V. -- Modeling of thermal welding cycles by Smirnov, A. G., Lyubavskiy, K. V. -- Magnetic control of the welding arc by Bachelis, I. A. -- Automatic regulation of roller welding of extended seams by Chuloshnikov, P.L., Sigal, I.M., Verdenskiy, V.B. -- Arc welding of Kh25T steel by Kakhovskiy, N.I., Didebulidze, D. V. -- Vacuum tight welding of armco iron to copper by Vinogradov, V. S., Polezhayev, M. A. -- Automation of welding in fabricating cylindrical shells from sheet material by Khanyants, R. O., Chernakov, G. A., Privalov, Yu. A. -- Physical and chemical problems of joining dissimilarmaterials by Rykalin, N. N., Shorshorov, M. Kh., Krasulin, Yu. L. -- New method for the ignition of plasma arcs by Buttner, G., Goepel, B.
Hydrogen and nitrogen absorption by metal in electric arc welding by Lakomskiy, V.I., Grigorenko, G.M. -- Pulsation arc welding with a bare alloy wire rod and without protective atmosphere by Slutskaya, T. M., Podola, N. V., Sheyko, P. P., Avramenko, V. A. -- Electroslag welding process with a free forming of the filler metal by Shvartser, A. Ya., Morozov, Yu. D. -- Investigation of the process of double-spot series welding by Chuloshnikov, P. L., Dmitriyeva, G. M. -- Control of the static characteristic of a low-voltage welding arc by Esibyan, E. M., Malkin, V. B. -- Plastic deformation during spot and seam welding by Zolotarev, B.B., Sagalevich, V.M. -- Weldability of heat treated 10G2SD steel by Makurin, V. A. -- A-c welding electrodes for 18-9 type steels by Yashunskaya, T. V. -- The determination of the mechanical properties of weld joints in thin steel sheets by Gal'perin, M. Ya., Sarkhosh'yen, G. N. -- Contact butt welding of duralumin sections under conditions of volumetric compression by Sakhatskiy, G.P., Sushil'nikov, V.N. -- TIG Welding with Power from a VS-1000-2 Rectifier by Zaruba, I.I., Gurevich, S.M., Blashchuk, V. Ye. -- The nature of the effect of a metal joint on crack formation in the heat-affected zone by Makara, A. M., Mosendz, N. A. -- Compairson between flashless resistance butt welding of pipes and induction welding by Slepak, E. S., Demin, V. V. -- "Conference on the Use of Rare Metals in the National Economy" by OBOLONCHIK, V. A. -- "Conference on the Nature of Metallic Phases and the Character of the Chemical Bonding in Them" by PETROVA, L. A. -- First colloquium on the welding of refractories and ceramics by Goryaynov, K. E. -- "Uranium and Arsenic in a Hydrothermal Process" by BOYTSOV, V. YE., KAYKOVA, T. M. -- "A New Large Deposit of Refractory Kaolin Clays in Irkutskiy Oblast" by LITVINTSEV, G. G. -- "Atoms Are Sorted Here" (A Story of Stable Isotope Production) by KNORRE, YE. -- Improved mechanization of chamber and blast hole charging with bulk explosives by Yemekeyev, V.I., Ostroushko, I.A., Mar'yenkov, V.V. -- Methods of studying electrical discharges arising from friction between polymers and steel by Tsurkan, V. P. -- Antifriction properties of solids at high temperatures in a vacuum and in some gaseous media by Semenov, A. P., Pozdnyakov, V. V. -- Gas arc cutting of thin 1Kh18N9T steel by Dobrotina, Z.A., Zusin, V.Ya. -- Roll pass design for wide-sectioned guiding turbine vane billets by Slin'ko, A.A., Vavilov, N.Yu. -- Molecular kinetic phenomena and processes of decarbonization, nitration, hydrogenation, and oxidation in dry friction by Dy*chko, A. A., Dy*chko, K. A. -- Effect of size of rotating bodies on the service life of roller bearings by Parakhonskiy, O. N., Tsiprin, A. M. -- Detonation -- a worker by Ivanov, V.
- Document Date: 6/15/1965.
- Reproduction Note:
- Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
- Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 21345548