East European Scientific Abstracts. Metals and Metallurgy. No. 3 [electronic resource].
- [Arlington Va.] : [publisher not identified], 1965.
- Physical Description:
- 47 pages : figures
- The effect of chromium, molybdenum, tungsten, and iron on the electrochemical and corrosive properties of Ni-alloys in the active state by Cihal, Vladimir (Chigal, Vladimir), Mechura, Jaroslav (Mekhura, Yaroslav), Prazak, Milan (Prazhak, Milan) -- Effect of temperature and composition on corrosion resistance of steels in liquid sodium by Ilincev, Georgi (Ilinchev, G.) -- "Notes on the Schwerdtfeger and the Stern Methods for Corrosion-Rate Determination. Part 2" by NOVAK, Mihaly, HORVATH, Jozsef -- "Data on the Corrosion of Carbon-Steel in A Solution of Ammonium Nitrate" by LIBOR, Oszkar, SOMOGYI, Gizella -- "The Selection of Casting Machines on an Economic Basis" by JOHANSEN, H. J. -- "Studies on Cracks in Thin-Walled Castings" by CHAPO, Elek -- "Casting of Aluminum Slabs". Part II by GALANTY Adam, MILOS' Stefan, SKOWRONEK Stanislaw -- "Casting of Aluminum Slabe". Part 1 by GALANTY Adam, MILOS, Stefan, SKOWRONEK Stanislaw -- "Using Fluidized Sand in Casting with Fusible Models." by TEODORESCU, A. -- "A Method for Designing Bins Used in the Ore Homogenizing Process by STEFAN'SKA Maria, STEFAN'SKI Marek -- "The Curve of Mean Values as a Criterion for the Evaluation of Flotation" by STEPIN'SKI Wlodzimierz -- "The Mining Condition of Debris Walls in the Nowy-Kos'ciol Mine" by KUNYSZ Narcyz -- "Zone Refinery of Aluminum" by AKERMAN Karol, BRAFMAN Marek, WOZ'NIAK Mieczyslaw, FALKOWSKA Maria, ZMIJEWSKA Wanda, KOZMIN'SKA Danuta, ADAMUSZEK Wieslaw, GOLKOWSKA Anna -- "The Electrical Method of Rock Crushing" by CZARNECKI Jerzy, EUSTACHIEWICZ Stanislaw -- "Filtration of Aluminum and Its Alloys" by GALANTY Adam, SKOWRONEK Stanislaw -- "Reliability of Geological Data for Copper Mining" by KONSTANTYNOWICZ Erast -- "The Form and the Setting of Coalescent Carbonate Aggregates" by ZACZEK Ferdynand -- "Effect of the Addition of MgF₂ on the Current Efficiency and on the Heating Voltage of an Electrolyzer" by LOPATA Roman, DZIERWA Ryszard, ORZECHOWSKI Stanislaw -- "Extraction of Aluminum Oxide in the Calcination Process by MACIAS' Jan -- "The Direct Reduction of Iron Ores by Means of the Gases Obtained Through the Conversion of Methane with Water Vapors." by HATARASCU, O., ATANASIU, Gh., PIETROSANEANU, M., DUMITRU, L. -- "Stress Relieving in Welds by Annealing" by HOLY, M. -- "The Use of High-Speed Reheating for the Heat Treatment of Tubes" by SEJNOHA, Roman, HYSPECKY, Lubos -- "Metallographic Analyses of Castings and Forgings by Means of Replicas" by TOMAN, L., LESNIAK, E. -- "Effect of Friction on Compression Tests of Cast Iron Samples" by MIKA, J., ONDRACEK, E. -- "Determination of Indium in Sphalerite and Lead-Zinc Ores by Means of Neutron Activation Analysis" by TOMOV, T., POPOV, C., STEFANOV, G., TOLGYESSY, J. -- "New Techniques in the Chemical Testing of Metallurgical Materials. Part 2: Basic Materials and Slag Testing" by POCZE, Laszlo -- "Radiometric Methods of Ore Analysis". Part I. Absorption Analysis. by DZIUNIKOWSKI Bohdan -- "Nomographic Method of Interpretation of X-Rays in the Fluorescence Analysis of Ternary Samples" by DZIUNIKOWSKI Bohdan -- "Application of the DARDEL Method in Determining the Hydrogen Content in Liquid Aluminum" by TARSKA Wladyslawa -- "The X-Ray Analysis of the Alpha and Gamma Allotropic Forms of Aluminum Oxide" by SZYMAN'SKI Jacek, WOZ'NIACKI Antoni -- "Preparation of a Series of Spectrographic Standards for the Quantitative Analysis of Semifinished Aluminum" by MILOS' Jozef, STUDENCKA Barbara -- "Nomographs of Surface Deformation as a Result of Mining Activity" by WOYCIECHOWSKI Jacek -- "Mathematical Study of the Relations Between the Production Capacity in Forging and Pressing Plants and the Weight of the Finished Unit Product" by TAKATS, Laszlo., "A Semi-Industrial Plant for the Manufacture of High-Purity Germanium." by MOLDOVAN, I., MOSCOVICI, Ana, TEODORESCU, C., GACIU, V. -- "The Alumina Plant of Oradea and the Aluminum Plant of Slatina." by PAVLON, I. -- "A New Plant for Copper Metallurgy." -- "The Shape of Free Mandrel Used in Cold Drawing of Tubes" by POCTA, Bohumil, CHMEL, Miroslav -- "Machining Requirements and Tolerances of free Forged Pieces" by ELFMARK, Jiri -- "Fixed Piercing Mandrels on the 140 Stiefel Rolling Train" by BEMBENEK, Zdenek, FOLTYN, Miroslav -- "New Methods of the Hot Extrusion of Steel of Difficult Workability" by SPURNY, Frantisek -- "Cold-Rolling of the Bimetallic Strip Made of ARMCO Iron and the Al-Sb-Mo Alloy". by BOHATYREWICZ, M. -- "Interchangeable Parts in the PROPERZI Installation". by POGAN Zygmunt, MARKIEWICZ Edward, PODGORCZYK Zygmunt -- "Feasibility Study of Molybdenum and Uranium Extraction from Carbonized Uranium Ore" by SZYMAN'SKA Danuta -- "A New Rolled Product Produced in Rumania." by URSULESCU, C., IEREMIA, A. -- Electroplating of uranium by Splichal, Karel -- "Reducing Characteristics of Liquid Fluxing Compounds Used in the Steel Galvanizing Process" by SOCHA Stanislaw -- "Experiments Concerning the Plating of Carbon Steel Sheets with Non-Corrosive Steel." by FRANTIU, I., LAIU, N., GREAVU, N. -- "Pneumatic Transportation of Granular and Powdered Materials in Foundries. Part 1" by SZILAGYI, Imre, VOROS, Arpad -- "Stabilized Dolomite as a Basic Refractory Product Prom Indigenous Raw Materials." by BIRLOGEANU, C., SZABO, A., BARBULESCU, E., DRAGOMAN, I. -- "Heat Resistant and Refractory Steels." by WANYOREK, C. -- "Some Problems of Extending the Life of Bolls and hoppers in Blast Furnaces" by BLASKOVIC, Pavel -- "Improvement of Continuous Walking Beam Furnaces" by TESARCIK, Miloslav -- "A 130-Ton Open Hearth Furnace Regulated by the ZPA Low-pressure Pneumatic system" by OBDRZALEK, Oldrich -- "A Contribution to the Problem of Covering Ferro-Alloy Reduction Furnaces" by TEPLICKY, Ernest, LESNOVSKY, Frantisek -- "Increase in the Service Life and Advantages of a Flat Roof in a 45-Ton Open Hearth Furnace" by DVORAK, Bohuslav -- "Exhaustion System in the Five-Ton electric Arc Furnace at the Old Steel Mill of the VZKG" by GILAR, Stanislav -- "Use of Oil in Blast Furnaces" by HODULAK, Antonin -- "Service Life of Ganister Roofs in Open Hearth Furnaces" by MERKA, Pavel -- "Desulfurization of Pig Iron by Means of Soda in the VZKG" by PUNCOCHAR, Zdenek -- "Pig-Iron Production in Czechoslovakia Using Non-Blast Furnace Processes From the View Point of the Uses of Pig Iron" by LUKES, Vlastimil -- "Experiments for Increasing the Efficiency of Direct-Feed Gas-Carburizing Ovens" by JOBAHAZI, Jeno -- "Results Achieved at Home and Abroad with Hydrocarbon Injection into Blast Furnaces" by HORVATH, Janos, HALASZ, Jozsef -- "The Research Station for Burners at the Combustion Research Institute, Ministry of Metallurgy and Engineering" by BIKICS, Zoltan -- "Contributions to the Desulphurization of Pig Iron Outside the Furnace by Powdered Lime Injection." by IATAN, N., AVRAM, C. -- "Notch Toughness of CSN 17 027 and CSN 19 434 Chromium Steel. Factors Causing Its Low Value and Methods of Improvement" by MUCKA, Jan, SYKORA, Jaromir -- "Possibilities of Making Steel for Reinforcements in Concrete Combines With Cold Deformation" by HONS, Jaromir -- "High-Carbon Cast Steel Drums" by SPRENCL, Antonin -- "Seminar for Tool Steel and Tools" by MORAVEK, Otakar -- "Off-Furnace Vacuum Metallurgy in the Steel Mill of the V.I. Lenin Works in Plzen" by KINSKY, Frantisek -- "Balanced Stool Deoxidized in the Ingot Mold. Part II. Properties of Steel" by HAROK, Milan, GOTTFRIED, Kamil, HAMZA, Zdenek -- The heat resistance of 12% Cr steels with tungsten, molybdenum, and vanadium by Koutsky, Jaroslav (Koutskiy, Yaroslav), Jezek, Jaroslav (Yezhek, Yaroslav), Jandos, Frantisek (Yandosh, Frantishek), Barackova, Lydie (Barachkova, Lidiya) -- "Manufacture of Cast-Steel Steam-Turbine Parts at the Steel Foundry in Diosgyor" by NAGY, Zoltan -- The Brittle State of the MTA 50 Steel. Part 2" by VERO, Jozsef -- "Study on the Transformation of Austenite into 41 C 10 Steel by Continuous Cooling." by ROTENSTEIN, B., and "Mechanism of Ultrasonic Welding" by HUTTEL, Ivan, NOHYNEK, Jindrich -- "Development of Welded Boiler Fittings" by JIRICEK, L. -- "Surface-Layer Arc-Welding Experiments with Roll-Stacking" by SZEGEDI VARGHA, Jozsef, MARKUS, Gyula.
- Report Numbers:
- Y 3.J 66:
- Document Date: 1/6/1965.
- Reproduction Note:
- Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
- Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 21345977