USSR Scientific Abstracts. Engineering and Equipment. No. 62 [electronic resource].

Published:: [Arlington Va.] : [publisher not identified], 1968.
Physical Description:: 143 pages : figures, tables

Access Online

ezaccess.libraries.psu.edu

Availability

Finding items...

Series:

USSR scientific abstracts - Engineering and equipment (1964-1973) ; JPRS-44387

Contents:

Automotive engine life by Gurich, I. B. -- Effect which some parameters of a fuel injecting pump with mechanical accumulator-type plunger drive have on fuel delivery and injection characteristics by Baraukov, S. I. -- Deformation of snow under large impact loads by Dolov, M. A. -- Suspended bridges by Kireyenko, Vladimir Ivanovich -- Designing a Flexible Foundation Wall for Horizontal Loading With the Discontinuity of the Base Taken Into Account by A. B. Ogranovich -- Operation stability of jet burners by Khristich, V. A., Lyubchik, G. N. -- Dispersion of liquids by Borodin, Viktor Aleksandrovich, Dityakin, YUriy Filippovich, Klyachko, Lev Abrarnovich, Yagodkin, Viktor Ivanovich -- Experimental study of the role of the non-steady-state and non-one-dimensional nature of the zone of component conversion in the combustion of combustion mixtures by Movikov, S.S., Pokhil, P. P., Ryazantsev, Yu. S., Sukhanov, L. A. -- Diffusion and kinetic characteristics of combustion chambers with gas diffusion burners by Shatil', A. A., Polyatskin, M. A., Lyubchik, G. N., Khristich, V. A., Khaynovskiy, Ya. S., Murashko, V. D., Tass, O. A. -- Penetration depth and boundaries of an annular gaseous diffusion flame in the transverse flow by Kink, A., Ivanov, Yu, Ivanov, J. -- Radioactive tracer methods of investigating ground water movement by Churayev, Nikolay Vladimirovich, Il'in, Nikolay Ivanovich -- Repair of defects in concrete in hydraulic engineering structures by Yeksarev, A., Agonin, L., Lisenko, V. -- Analysis of the cavitational properties of the combined stage of a condensate centrifugal pump by Yalovoy, N. S. -- Pattern of billet shaping during the roller burnishing of thin-walled nonferrous-metal container bottoms by Zalesskiy, V. I., Kozlov, Yu. I., Lin, S. T. -- Computers and the automation of mental work by Glushkov, V. M. -- Use of ultrasonic oscillations for intensifying the galvanizing process by [Illegible] O. N., Knyazev, I. A., Shchavina, M. V. -- Structural [Illegible] of automatic lines for batch [Illegible] of part by Gusarev, V. S. -- Classification of technological processes-basis of combined mechanization and automation of the production of gas-turbine engines by Shakhurin, V. N. -- Automation in metallurgy by Gerasimenko, V. A. -- Hot pressing of copper powder by Aksenov, G. I., Bunova, G. Z. -- Pattern of movement in the contact zone during rolling by Aksenov, G. I., Revyakin, V. N. -- Derivation of the basic equation for different variants of metal powder rolling by Aksenov, G. I., Revyakin, V. P. -- On the cooling of large masses of metal in film flow by Chudner, G. V., Ryabukhov, S. I. -- Bifilar method of electroslag melting by Latash, Yu. V., Medovar, B. I., Leybenzon, S. A., Kaganovskiy, G. P., Gasuyev, G. Kh., Zabuluyev, Yu. I., Smolyakov, V. F. -- Production technology of special curved sections with elastic properties by Vorontsov, N. M., Trishevskiy, I. S., Shugayenko, V. K., Drapiko, P. Ye. -- Certain technological problems of the pressure working of high-temperature low-plasticity alloys by Stepanskiy, L. G., Morozov, Yu. G., Shlyakhin, A. P. -- Parameter-monitoring digital unit for centralized-control machines by Gegidze, Sh. S., Klebanskiy, R. B., Lemberg, L. M. -- Method of manufacturing hollow cermet articles Class 7, No. 201287 [announced by: Institute of the Problems of Materials Science, AN UkrSSR (Institut problem materialovedeniya, AN Ukrainskoy SSR)] by Vinogradov, G. A. -- Method of drawing shapes. Class 7, No. 201306 (announced by; ALL-Union Scientific Research and Design Technological Institute of Tube Industry (Vsesoyuznyy nauchno-issledovatel'skiy i konstruktorsko-tekhnologicheskiy institut trubnoy promyshlennosti) by Tarasenko, R. I., Karasik, Ye. E., Mombelli, V. V., Medvinskiy, M. D., Truskov, Yu. N., Method of steel melting. Class 18, No. 201449 by Gurevich, Yu. G., Markelov, A. I., Fisher, S. M., Khasin, G. A., Sidorov, N. V., Cheremnykh, B. A., Kas'yanov, A. G. -- Improvements in the equipment and technology of electron-beam welding by Suvorin, V. Ya., Ryzhkov, F. N., Vasil'yev, V. S. -- A method for high frequency welding of polyethylene. Class 39, No. 200141 [announced by Saratov Scientific Research and Design Institute for Utilization of Gas in the National Economy, Design of Gas Distributing Systems, and Construction of Gas Equipment (Saratovskiy nauchno-issledovatel'skiy i proyektnyy institut po ispol'zovaniyu gaza v narodnom khozyaystve, proyektirovaniyu sistem gazosnabzheniya i konstruirovaniyu gazovoy apparatury)] by Loginov, V. S., Vigdorchik, Ya. Yu. -- Electrolytic boron-aluminum plating by Dolmanov, F. V., Lyakhovich, L. S. -- Ultrasonic metalworking by Severdenko, Vasiliy Petrovich, Gorev, Konstantin Vasil'yevich, Konovalov, YEvmeniy Grigor'yevich, YEfremov, Vladimir Ivanovich, Shevchuk, Lev Aleksandrovich, Klubovich, Vladimir Vladimirovich, Labunov, Vladimir Arkhipovich -- Chemical process in formulas by Rumyantsev, A. R. -- A method for electrolytic polishing of steel parts. Class 48, No. 201002 [announced by the All-Union Scientific Research Institute of Design and Technology in the Pipe Industry (Vsesoyuinyy nauchno-issledovatel'skiy i konstruktorskotekhnologicheskiy instiut trubnoy promyshlennosti)] -- Manufacture of jet fuels from Turkmenian natural oils by Muchinskiy, D. Ya., Makhtamov, D. N. -- Automatic unit for pulsed argon-arc welding of fixed joints of thick-wall tubes by Vaguer, F. A., Stepanov, V. V. -- Effect of preheating on the residual stresses in welded steam pipelines from [Illegible] steel by Minasaryan, A. A., Artemyan, G. L., Timofeyev, N. M. -- Aging of Fe-Ni-Ti alloys in the process of reverse martensitic transformation α → γ by Zemtsova, N. D., Vasilevskaya, M. M., Malyshev, K. A. -- Investigation of sintering and properties of wintered chromium-base materials by Fedorchenko, I. M., Solonin, S.M. -- Low-pressure castings of intricately shaped aluminum alloy parts by Timofeyev, G. I., Roshchin, M. I., Kuznetsov, G. F. -- Effect of electropulse treatment of edges on the corrosion resistance of OKhN10T steel welds by Zaks, I. A. -- Automatic, CO₂ gas-shielded welding of 1K18N10T steel vacuumtight cylinders by Chengurayev, L. I. -- Gallium- copper metal bonding by Tikhomirova, O. I., Pikunov, M. V., Tochenova, I. N. -- Electrolytic boron-chrome-plating of metals and alloys by Voroshnin, L. G., Lyakhnovich, L. S., Shcherbakov, E. D. -- Anodic process of formation of oxide films on aluminum, magnesium, and titanium, as revealed by the tagged atom method data by Bogoyavlenskiy, A. F. -- The voltage balance during anodic treatment of alloy VK8 by Levin, A. I., Yevseyeva, M. A., Fedyushkina, Ya. A. -- Friction welding of EI695R Steel to M3 Copper by Medrish, I. N., Luzhanskiy, I. B. -- Filler wire for welding dissimilar steels. Class 21, No. 200076 [announced by the Institute of Electric Welding im. Ye. O. Paton (Institut Electrosvarki) by Gotal'skiy, Yu. N., Snisar', V. V., Tsykulenko, A. K. -- Effect of high-temperature annealing with melting of aluminum matrix on the properties of SAP material by Kurbatov, V. S., Shelamov, V. A., Shmakov, Yu. V. -- Welding rod for welding high-strength steels. Class 49, No. 199605 [announced by Izhorsk Plant im A. A. Zhdanov (Izhorskiy zavod im. A. A. Zhdanov)] by Makhora, A. Ye., Filimonov, D. I., Korshunov, V. A., Knyzev, V. A., Zaytsev, M. N., Selivanov, G. S. -- Effect of carbon on the growth rate of deposited borate layer by Voroshnin, L. G., Lyakhovich, L. S. -- The strength of welded joints of oxidation-resistant VNS-5 steel by Laptev, A. A., Lyubalin, A. M., Manuylov, N. N., Demina, N. I. -- On the possibility of healing damaged material by restoration heat treatment by Ivanova, V. S., Vorob'yev, N. A. -- Development of modern machine-building technology by Unksov, Ye. P., Disk brake. Class 62, No. 199680 by Zverev, I. I., Kokonin, S. S., Bratman, I. B., Boguslavskiy, A. A., Khrushchev, L. M. -- Comparison of the methods of allowance for dynamic connections existing between measured and true values by Itskovich, E. L., Podval'nyy, S. L. -- Physical geographic regionalization of the Democratic Republic of Vietnam by Zavriyev, V. G. -- Relation of shrinkage to the stressed state arising within the briquet during sintering by Aksenov, G. I., Kryukov, V. I. -- Study of the effect of ultrasonic vibrations on the deformation resistance of metals by Saverdenko, V. P., Klubovich, V. V., Kharitonovich, M. V. -- On modeling the pitting deterioration of plates of a ship hull under static loading by Chapkis, D. T. -- Influence of oxide films on the formation of joints during pressure welding of metals by Gel'man, A. S., Bol'shakov, M. V. -- The results of model tests for determining shock bending [Illegible] by Bel'gova, M. A. -- Some problems of sag of a flexible fiber of variable cross section by Karakotskiy, Ye. B., Semenov, Yu. V. -- Torsion oscillations of buildings during seismic interactions by Shepelev, V. F. -- Brittle failure of welds in heat-strengthened low-alloy steels by Kuzmak, Ye. M, Khakimov, A. N., Sonkin, Ye. A., Logvinov, V. I. -- Displacement of the Oscillation Frequencies of a Helical Polymer Molecule In Tension by A. I. Gubanov -- The Nature of the Breakdown of Metals Under Cyclic Thermal Effects by Ye. I. Bel'skiy, A. A. Tsymbalyuk -- Methods of Suppressing the Parametric Resonance Produced During the Travel of a Mine Hoist Container Along the Mine Shaft by Yu. G. Ispolov -- Performance of cooled high temperature gas turbine at a variable regime by Saprykin, G. S. -- Investigation of annular impulse cascades with partial admission by Yemin, O. N., Moravskiy, A. V. -- The effect of the internal configuration of a boundary surface on turbine stage characteristics by Moiseyev, A. A., Topunov, A. M., Shnitser, G. Ya., Danilovskiy, A. G. -- The dynamics of high temperature single-shaft gas turbines by Bochnev, Yu. A., Potapov, A. I. -- The effect of the convergence of an interblade channel on losses in turbine cascade profiles with an oblique face wall by Kopolev, S.Z., Nesterenko, V.G. -- Calculation of the left branch of the pressure characteristic of an axial compressor with axially symmetric flow by Yershov, V. N. -- Optimum degree for a sudden channel expansion by Merozov, D. I. -- Investigation of a compact, high-efficiency, four-cascade, annular diffuser by Pankov, O. M. -- Two tons on board at 30,010 meters by Raspevin -- Il-62: economy, safety, comfort [[Illegible] jet Passenger aircraft] by Pipko, D. -- Electrical equipment for a new helicopter by Nedoluzhko, I. -- Here begins the prelaunch count by Yefremov, N. -- Air taxi by Raspevin, K. -- A parachute for four -- An instrument which gives the angular deflection of a cable for external suspension of a load from a helicopter. Class 42, No. 200788 by Sudakov, G. P., Barsukov. [Illegible], Dobrolyubov, N. V., Kolotilkin, S. V., Ryabov, V. P. -- Static response of a gasodynamic bearing to angular displacement of journal axis by Ivanov, Yu. R. -- Actuating valve for pressure regulating systems in pressurized aircraft cabins. Class 47, No. 199600 by Vzorov, M. I., Kritsyn, A. L., Medvedev, A. A., Tuflin, V. F. -- The elastic characteristics of a cylindrical gas bearing of finite length during the angular displacement of its internal cylinder by Petrova, V. V. -- Investigation of the fuel system of engines with hydraulic locking of the atomizers by Khitushko Ye. V. -- Modern scaling technology for hydraulic devices by Kondakov, L.A., Prokofyev, V. N. -- Hydraulic hammer. Class 49, No, 199646 [announced by the Experimental Scientific-Research Institute of Forging and Pressing Machine Building (Eksperimental'nyy nauchno-issledovatel'skiy institut kuznechno-pressovogo mashinostro'eniya) by Bronin, G. K., Vasil'yev, B. P., Kazak, V. V., Kononov, I. V. -- Pulsed-power hydraulic press hammer by Zimin, A. I., Kagarmanov, A. F., Device for lowering pressure in hydraulic systems. Class 47, No. 202671 [announced by Izhorsk Plant im. A. A. Zhdanov (Izhorskiy zavod)] by Mikheyev, V. A., Belyayev, G. A. -- Electrohydraulic speed governor for an engine. Class 46, No. 198057 [Announced by Central Scientific-Research and Design Construction Boiler and Turbine Institute im I. I. Polzunov (Tsentral'nyy nauchno-issledovatel'skiy i proyektno-konstruktorskiy kotloturbinnyy institut)] by Minchin, M. A., Baulin, V. M., Romanovskiy, M. V., Frumkin, V. B. -- A pumping system. "Class 62, No. 201115 by Polinovskiy, A. Yu., Leshchiner, L. B., Ivanov, B. S. -- Leningrad - Aswan [Turbines for Aswan hydroelectric power plant] -- Unit for forming metal blanks by pulsed magnetic fields. Class 7, No. 199806 by Mittel'man, I. D., Ivanova, Ye. V., Raykh, D. B., Stolbunov, A. S., Goncharenko, G. M., Kuzhekin, I. P., Prokhorov, Ye. N. -- Equipment for automatic arc welding of curvilinear rotatable parts. Class 21, No. 200082 by Sergeyev, Yu. Ye., Kobzev, V. V. -- Gating and risering systems for large, thin, light alloy castings by Sokolov, Ye. A., Kashirtsev, L. P. -- Three-stand four-high continuous foil rolling mill 250/600×1200 by Malenok, F. T., Kovalenko, P. A. -- Cavitation method of removing boiler scale from pipe lines of heat exchangers by Fishgal, S. I. -- A die for flashless forging. Class 49, No. 199648 by Krivsha, G. G., Kushnikova, V. S. -- Device for making microwire. Class 48, No. 199618 by Danilov, Yu. P., Skvortsov, M. P. -- Device for vacuum diffusion welding. Class 49, No. 199653 by Khudyshev, A. F., Venzovskiy, M. V., Elbakidze, V. G. -- Off-shore foundation for a drilling rig. Class 5, No. 199054 by Andreyev, I. M., Babayev, N. Kh., Dlugiy, D. I. -- Salt bath for dip brazing of aluminum and its alloys. Class 49, No. 199652 [announced by the All-Union Scientific Research Institute of Oxygen Machinery Building (Vsesoyuznyy nauchno-issledovatel'skiy institut kislorodnogo mashinostroyeniya)] by Baranov, N. S., Yekatova, A. S., Golodova, T. L. -- Assembly for testing aircraft instruments. Class 42, No. 200249 by Antonov, Yu. V., Levin, L. P., [Illegible] S. P. -- A stand for testing aircraft fenestration at high temperatures. Clans 42, No. 200263 by Rayev, M. A. -- Selsyn torsion meters by Sukhov, B. -- Device for determining cyclic energy dispersion in dampers. Class 42, No, 199458 by Ivanov, V. P., Shaymordanov, L. G. -- Stand for dynamic testing of framework-design rotor blades. Class 42, No. 199459 by Sirotinskiy, B. S., Shnurov, Z. Ye., Bulkin, M. P., Selikhov, A. F. -- Pulse selection for measuring the air flow rate in gas turbine engine governors by Vlasenko, I. V. -- Method for determining the concentration of oily aerosols associated with mechanical imparities in air ducts by Osina, S. A., Kolyadich, M. N. -- Condensation of the error in vertical misalignment of the edges of a joint in follow-up systems in arc welding by L'vov, N. S., Igoshin, A. P., Surkov, V. B. -- Multiposition devices with digital display for measuring warpage of sheets by Kondashevskiy, V. V., Mikhaylovskiy, M. N., Tret'yakov, A. V., Semenov, S. P., Kolesnikova, A. L., Yeryukhina, N. A., Gordon, E. A., Zinov'yev, Ye. G. -- Assembly for inspecting the profile of a blade. Class 42, No. 200188 by Markov, Ye. V. -- A method of investigating the kinetics of shrinkage during the sintering of metal-powder specimens by Aksenov, G. I., Kryukov, V. I. -- Hydraulic friction of boiling ethyl alcohol below the saturation temperature at high discharge velocities by Adamovskiy, V. I., Kutateladze, S. S., Shtokolov, L. S. -- Assembly for correcting the proportional control of, say, a ship propeller by the angle of rudder turn. Class 65, No. 199698 by Lyandres, D. M., Kravchenko, I. I., Vapnyarskiy, A. I., Gurina, A. P. -- An indirect method for checking the initiating capacity of detonator caps. Class 78, No. 201185 by Gusev, V. Z., Zaytsev, A. P., Malyarenko, Yu. F., Okhil'kov, G. T., Sidel'nikov, V. V. -- Interference-type dynamometer by Galyamov, Yu. G., Koronkevich, V. P., Lenkova, G. A., Lokhmatov, A. I., and Experimental investigation of low frequency magnetic induction sensors for electrical prospecting equipment by Nichoga, V. A. -- Machine for tensile strength tests. Class 42, No. 200258 (announced by the Interbranch Laboratory of Electrohydraulic Effects (Mezhotraslevaya laboratoriya [Illegible] effekta)] by Shneyerson, G. A., Arenkov, A. B., Barbarovich, Yu. K., Livshits, Yu. Ya. -- Methods and equipment for bending specimens in an ultrasonic field by Konovalov, Ye. G., Pavlov, L. G. -- VESOYUZNYY AUCHNO-ISSLEDOVATEL'SKIY INSTITUT RADIATSIONNOY TEKHNIKI. TRUDY INSTITUTA. VYPUSK 1. RADIATSIONNAYA TEKHNIKA by A. S. Shtan' -- A pneumatic suspension without shock absorbers und with two-stage pretensioning of the elastic elements. Class 63, No. 201138 [announced by the Military Academy of Armored Tank Troops (Voyennaya akademiya bronetankovykh [Illegible]) by Smotritskiy, M. I. -- Integrator for solving a two-dimensional boundary value problem of parabolic type. Class 42, No. 199533 by Iodko, E. A., Shklyar, V. S. -- Pneumatic integrator. Class 42, No. 199534 by Shevnin, S. V. -- A cryostat for investigating specimens at low temperatures. Class 42, No. 202563 [anncunced by Physico-technical Institute AN Ukrainian SSR (Fizikotekhnicheskiy institut AN Ukrainskoy SSR] by Gindin, I. A., Kravchenko, S. F., Starodubov, Ya. D. -- Some special features of freon refrigeration units on ships by Popov, A. A. -- Contactless electromechanical device for feeding the electrode in a vacuum arc furnace by Kolker, M. I. -- Melting of tungsten in a DC vacuum arc furnace with direct polarity by Vasyukov, G. Kh., [Illegible] V. I., Samarin, A. M. -- Adsorption vacuum traps for rotational and oil-vapor pumps by Rozanov, L. N., Gurevich, L. S. -- Pipe-line seal. Class 47, Ho. 202667 by Sagaydachnyy, V. A., Terent'yev, Yu. V. -- Electron beam unit for vacuum vaporization of metallic and nonmetallic materials by Bogachek, L. M., Demchishin, A. V. -- Hollow metal sealing ring. Class 47, No. 202666 by Maslyukov, O. A., Leonov, A. I., Shibalov, M. V.

Report Numbers:

Y 3.J 66:

Subject(s):

Note:

Document Date: 2/15/1968.

Reproduction Note:

Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.

Terms of Use and Reproduction:

View MARC record | catkey: 22077415