Actions for USSR Scientific Abstracts. Engineering and Equipment. No. 60 [electronic resource].

Email RIS file
Bookmark
Report an Issue

USSR Scientific Abstracts. Engineering and Equipment. No. 60 [electronic resource].

Published
[Arlington Va.] : [publisher not identified], 1968.
Physical Description
174 pages : charts, figures, tables
Access Online

Availability

I Want It
I Want It

Finding items...

Series
Contents
Sheet stamping in automotive construction by Rovinskiy, G. N. -- Investigation of the strength and operational properties of wheel rims for large tires by Putin, V. A., Zubarev, N. A. -- Allowance for the effective mass of the structure in the design of vehicle frames for impact by Devoyno, G. N. -- The instability of a loose medium when shock waves and detonation waves [Illegible] over its surface by Borsov, A. A., Lyubimov, A. V., Kogarko, S. N., Kozenko, V. P. -- [Illegible] investigation of energy distribution in a contact explosion by Alekseyenko, V. D. -- Investigation of electric field interaction with a "singing" flame by rapid Schlieren photography by Abrukov, S. A., Kurzhunov, V. V., [Illegible] V. N. -- Electrical activation of fuel mixtures for internal combustion engines by D'yachkov, V. N. -- Determining the time from the moment of explosion to that of the emergence of detonation products from a duct into the atmosphere. Class 83, No. 200498 by Mits, V. N., Belyy, V. D., Galadzhiy, F. M., Zenin, V. I., Prikhod'ko, V. M. -- Some problems of flame conductivity by Shtessel', E. A. -- Ignition and combustion features of atomized fuels in oxygen-enriched media by Sviridov, Yu. B., Ye. V. Shatrov, Ye. M. Kamfer -- Fuel-evaporation effect on duration of ignition delay in two-phase mixtures by Kudryavtsev, A. V. -- High-frequency pulsations during solid-fuel combustion by Shchelkin, K. I. -- Spontaneous ignition of metal particles by Fedoseyev, D. V. -- Simulation of combustion chambers by Varshavskiy, G. A. -- Heat exchange between an atomized liquid and an opposite gas flow by Prikhodchenko, G. P. -- Some problems concerning the transition from a channel flow to a jet flow by Sekundov, A. N., O. V. Yakovlevskiy -- Discrete changes of the wave structure in gas detonation by Denisov, Yu. N., Ya. K. Troshin -- Calculation of propellant reserve by Beletskiy, V. V. -- Viscosity effect on spontaneous combustion of a reactive flowing mixture by Grishin, A. M. -- Investigation of rarefield acetylene-air flame by probes by Tverdokhlebov, V. I., M. Ye. Tretenko, E. N. Taran -- Step by step method of seam welding. Class 21, No. 197797 by Kazakov, Yu. V., Sindyukayev, N. P. -- A method of relieving welding stresses. Class 21, No. 197504 [announced by Electric Welding Institute im. Ye. O. Faton (Institut elektresvarki) by Asnis, A. Ye., Ivashchenko, G. A. -- The envelope method of forming surfaces during electroerosion machining by Polotskiy, V. Ye. -- Method of arc welding in protective gases. Class 21, No. 197808 by Potap'yevskiy, A. G. -- State of the art and trends in development of technology of metal machining by electric means [Abridged report at the 2nd International Congress on Electric Machining of Metals, Brno, 1966] by Stakek, I. -- Electrospark erosion of metals and some scientific problems in this field [Abridged report at the 2nd International Congress on Electric Machining of Metals. Brno, 1966] by Lazarenko, B. R. -- Productivity and accuracy in the precision profiling of noncircular surfaces by Prenkel', M. S., Tal'yanker, M. Ya. -- Material removal in pulsed electron-beam machining by Popov, V. K. -- Effect of conditions of electrochemical machining of metals on roughness of resulting surface by Sedykin, F. V., Filin, V. I. -- Extrusion of cutting tools from R12 high-speed steel by Severdenko, V. P., Muras, V. S., Sukhodrev, E. Sh. -- Method of ensuring the optimum [weakest] bond between electrodeposited copper and aluminum alloy used as a permanent pattern by Gofman, Ya. A. -- Thermochemical treatment of steel in media obtained by electric discharges in solutions by Vanin, V. S., Petrova, L. B., Investigation of the pressures and rates of steel tube extrusion in horizontal tube presses of the YuTZ by Pritomanov, A. Ye., Chepurko, M. I., Mandzyuk, B. V., Calitskiy, B. M., Letuchiy, I. S. -- Resistance butt welding of Molybdenum to armco Iron by Chengurayev, L. I. -- Experience in the diffusion bonding of hard alloys by Gerasimenko, K. S., Spirina, S. I. -- Remote reading and positioning of heavy machine tool control mechanisms by Slezinger, P. I. -- Method of strengthening parts of surface work hardening. Class 18, No. 197650 [announced by the Central Scientific Research Institute of Technology and Machine-Building (Tsentral'nyy nauchno-issledovatel'skyy institut tekhnologii i mashinostroyeniya)] by Zaytsev, G. Z., Alishoyev, L. R., Kudryavtseva, S. V. -- Multipulse spot welding. Class 21, No. 197796 by Balkovets, D. S., Kaganov, L. N. -- A method of manufacturing multiple-wire tape superconductor. Class 21, No. 198430 [announced by the Joint Institute of Nuclear Studies (Ob'yedinennyy institut yadeniykh issledovanyy) by Pryanichnikov, V. I., Turbin, Yu. A., Shishev, Yu. A. -- A method of sintering metal-ceramic hard alloys. Class 40, No. 198661 [announced by the Ukrainian Scientific-Research Institute of Synthetic Superhard Materials and Tools (Ukrainskiy nauchno-issledovatelskiy institut sinteticheskich sverchtverdych materialov i instrumentov)] by Babich, M. M. -- Method of pressure welding. Class 49, No. 198894 by Kitayev, A. M., Kolesnichenko, V. A. -- Application of ultrasonic vibrations to solids during heat treatment of aluminum alloys by Novik, F. S., Pogodina-Alekseyeva, K. M., Kolobnev, N. I. -- Effect which viscosity, temperature and the physicochemical nature of the solvent have on operational effectiveness of surface-active agents during ultrasonic machining of metals by Kurochkin, N. V., Likhtman, V. I. -- A method for holding a constant gap between electrodes during electrochemical dimensional machining of metals by Berezkov, B. N. -- Electrical methods for machining gears (in a pair) by Dushkin, V. M. -- Accuracy in centering collet chucks by Yevmenenko, B. S. -- Effectiveness of diamond lapping on end milla tipped with hard alloy by Mitryayev, K. F. -- Investigation of hole spreading during reaming of titanium alloys by Zheleznov, G. S. -- Method of setting the cutting tool for fine boring by Mukhin, A. V. -- Method of deforming metal by stretching Class 7. No. 196700 by Shevakin, Yu. F., Grodnitskiy, Yu. S., Ozol,' V. L. -- Strengthening effect of ultrasonic cleaning in a liquid medium by Matyushin, L. V. -- New developments in the electrophysical and electrochemical processing of materials by Popilov, L. Ya. -- Conversion of aviation gas turbine engines to marine engines for hydrofoil boats by Mityushkin, Yu. I. -- The problem of a vertical submarine foil by Borisyuk, M. N. -- A device for sealing holes in the hull of a ship -- Experience in adjustment and operation of a system for automatic control of the electric plant on a fishing vessel by Ruderman, Z. S., Smirnov, A. N., Tokarev, L. N. -- On methods and a system for integrated automation of marine power plants by Rumyantsev, I. A. -- On a criterion for optimum control of the course of a ship by Karasev, A. V., Lukomskiy, Yu. A., Musin, Ye. A. -- Automation of ship operation systems by Fedorko, Petr Petrovich -- two-phase injection of different diesel fuel oils by Semenov, B. N., Pavlova, V. M. -- Investigation of the dynamics of integrated barge fleets when pushed by Merkt, R. -- Marine storage batteries; servicing and maintenance by Dubovoy, Anatoliy Aleksandrovich, Polyanakiy, Vasilly Fedorovich -- Relations determining cathode wear in electrospark machining of metals by Samsonov, G. V., Mukha, I. M. -- Cast turbine blades by Bogdanov, M. T., Getsov, L. B. -- Investigation of the antifriction properties of materials for journal bearings to be operated in nitric and acetic acids by Vasil'yev, I. V., Gopius, A. D. -- Singularities in machining of intractable weakly magnetic 45G17Yu3 Steel by Raykhenshteyn, I. Ts., Investigation of the possibility of using hot extrusion in the production of rounds from hard-to-deform alloys by Dzugutov, M. Ya., Vinogradov, Yu. V., Golovanenko, S. A., Chernov, A. N. -- Reducing ends of molybdenum tubes by Korolev, V. N., Galakhov, A. I. -- Effect of initial temperature of hot die forging on macrostructure and mechanical properties of titanium-alloy forgings by Dubnik, I. N., Mikhin, T. A. -- Investigation of the inclusions and structure of melts of 08Kh20N10G6 chromiumnickel steel melted with various deoxidizing agents by Gromova, G. P., Ryl'nikova, A. G., Smirnova, A. V., Krasnova, A. K., Vinograd, M. I., Gnuchev, S. M., Osnovin, V. A. -- Relationship between the techniques of the melting of stainless steels and their plasticity during hot deformation and welding by Trakhimovich, V. I, Gnuchev, S. M. -- Glues for equipment maintenance by Shilko, N. V. -- Corrosion resistance of structural materials in sodium by Zotov, V. V., Nevzorov, B. A., Umnyashkin, Ye. V. -- Certain properties of products made of iron powder treated with 6% chromium by Denisenko, E. T., Napara-Volgina, S. G., Panfilov, Yu. A., Radomysel'skiy, I. D., Fedorchenko, I. M. -- Some findings on operating a D-20 four-cycle diesel with various fuels by Guseynov, A. S. -- Investigation of the machinability of VT14 titanium alloy and Kh12N20T3R (EI696) refractory steel using hard-alloy cutters lapped on diamond wheels and with boron carbide by Uryvskiy, F. P., Sukhinina, L. A. -- Improving the quality of the surface and the operational properties of parts made from EI643 and 30KhGSNA high-strength steel by regulating the process of residual stress formation by Kravchenko, B. A., Svetlichnov, B. P. -- Investigation of porous cermet fire barriers by Strizhevskiy, I. I., Solonin, S. M., Pugin, V. S., Fedorchenko, I. M., Sidorina, I. Yu. -- Exceptional features in the use of diamonds for machining hard-alloy, ceramic and high-speed tools by Semko, M. F. -- Exceptional features in the use of diamonds for grinding intractable materials by Kondratov, A. S., Starkov, V. K. -- Machining Hastelloy-D by Filonenko, S. N., Luka, V. P. -- Determination of mercaptans in jet fuels by Bol'shakov, G. F., Stekhun, A. I., Chalykh, N. D., Pokhitun, L. Ye. -- Production of fine nichrome strip for foil transducer's operating at high temperatures by Krasnykh, V. I., Lyubenko, E. A., Sizov, Ye. A. -- Working capacity of polymer journal bearings in a vacuum by Paptsov, G. M. -- A study of the possibility of lowering the carbon black expulsion by automotive diesel engines by applying catalysts and fuel additives by Grigor'yan, V. T., Gargala, R. V., Malov. R. V. -- Application of ultrasonic vibrations during the heat treatment of aluminum alloys by Novik, F. S., Pogodina-Alekseyeve, K. M., Kolobnev, N. I. -- Effect of elastic vibrations on certain physico-mechanical properties of B-83 babbit by Pogodin-Alekseyev, G. I., Galushkin, I. D., Shevtsov, Ye. A. -- High-sulfur crudes of Kuybyshov Province by Lazareva, I. S. -- Neutralization of nitrogen oxides and aldehydes on thermovermiculite saturated with chemical solutions by Tsarev, V. V., Gavshin, A. L. -- Hydrogen brittleness of metals by Moroz, Lev Solomonovich, Chechulin, Boris Borisovich -- A depth of 15,000 meters! by Perehik, A. I. -- New methods and prospects for development of blasting operations in open-pit mining (Novyye melody i perspektivy razvitiya vzryvnykh rabot na kar'yernkh) by Drukovannyy, Mikhail Fedorovich, Geyman, Leonid Mikhaylovich, Komin, Vitally Mikhaylovich -- Modern facilities and technology of blasthole drilling in breaking up underground ores by Gagulin, Mikhail Vasil'yevich -- Improving drilling and blasting operations In potassium sines by Kutuzov, Boris Nikolayevich, Globa, Vladimir Moiseyevich -- Contour blasting in mining by sinking by Baron, Lazar' Izrailevich, Klyuchnikov, Aleksandr Vasil'yevich -- Experience in the use of phonometrie equipment to study the stressed state of rock during submining Karaganda Basin mines by KanlybayEva, Zh. M., Klinovitskiy, F. I., Il'mukhamedov, T. G., Sealed storage batteries and their application in the mining Industry by Ten'kovtscv, Vitally Vladimirovich, Vasil'yev, Kirill Vladimirovich -- Establishment of rational parameters of n packet on the basis of the rock pressure factor as applied to conditions of the hydraulic mining section of mine No 106 by Dzhakupbayev, A. N., Baymukhamedov, Kh. I., Akhmed-Galiyev, E. S. -- The geomechanics of rocks and mine surveying by Blokh, N. P., Sashurin, A. D., Zubkov, A. V., Tsaregorodtsev, V. M., Orlev, V. S. -- Engineering research and development -- Using mountain pressure for establishing a new technology of mineral extraction by Mil'chenko, D. V., Omarbayev, N. O -- Stability of drifts drilled behind long working faces by Kostomanov, A. I. -- On the movement of rook about haulage drifts In workings of steep coal bods in the Donets Basin by Kompan, V. A. -- Basic features of a beresite gold-polymetallicdeposit by Kalinkin, N. Ya. -- Calculation of the edge effect in shells of revolution by Borshch, Yu. I. -- Determining the life of an aircraft wing subjected to aerodynamic heating by Krestovskiy, S. S. -- Thermal modeling study of residual stresses in metal after machining by Rykalin, N. N., Podzey, A. V., Novikov, N. N. -- Experimental study of the dynamics of the oscillatory system of an ultrasonic machine tool by Astashev, V. K., Sakayan, A. R. -- Determining the supporting power of a gas thrust bearing with spiral grooves of arbitrary transverse profile by Burgvits, A. G., Yemel'yanov, A. V. -- Studies on the rheological and mechanical proportion of rooks in a slowly increasing stress field by Shekhurdin, V. K. -- Nonlinear oscillations of friction systems with a one-way link by Toropov, O. A. -- Theoretical and experimenta invostigations on the mechanium of rock failure by Eel'shtoyn, Ye. I., Eygeles, R. M., Estrin, Yu. Ya., Korel'ko, [Illegible] I. -- Plotting the Limiting-state surfaces for rooks from experiments on extension and compression under confining pressure by Eygeles, R. M., Estrin, Yu. Ya. -- Some problems of failure in brittle rooks under compression by Cherepanov, G. P. -- From of the deflection line in a weightless rotating shaft with eccentric mass points or disks attached by Ogurechnikov, A. N. -- Forced vibration of a free shaft with friction by Artemov, Ye. A. -- Determining dynamic compliance in friction systems by Balepin, V. M. -- The solution of integral equations of basic problems of the mathematical theory of elasticity for a torus by Usenbayeva, K. -- Strain diagram in rods produced by the hydrostatic and inverse extrusion methods by Zalesskiy, V. I., Vokshin, B. S. -- The consideration of damping and hardening in the design of structures to with-stand seismic stresses beyond the elastic limit by Darbinyan, S. S. -- Kinetics of the structural transformations and fracture of high-temperature alloys during stress-rupture tests by Kryanin, I. R., Mirkin, I. D., Trusov, L. P. -- Aerodynamics of centrifugal compressors by Livzhits, Somon Peysakhovich -- Analytical determination of the thermal condition of & cooled shell-type blade by Matsevityy, Yu. M., Slitenko, A. F. -- Cooling effectiveness of shell-type gas turbine blades with thermal Insulation coating by Shnee, Ya. I., Kapinos, V. M., Matsevityy, Yu. M., Latyshev, S. V. -- Carburetion in a rotary-piston engine. Class 46, No. 199561 (announced by the Scientific Research Automotive Institute (Nauchno-issledovatel'skiy avtomobil'nyy i avtomotornyy inztitut)] by Sviridov, Yu. B. -- A study of losses in a supersonic turbine stage with a small intake rate by Levenberg, V. D. -- On designing an intermediate turbine stage by Topunor, A. N., Kulesh, Yu. N., Tikhomirov, B. A. -- On the selection of optimal number of stages for a gas turbine, taking the condition of equal strength into account by Kotlyar, I. V. -- Comparison of three types of multistage labyrinth seals by Orlik, V. G. -- Determining optimal parameters for stress-damping bearings for turbine rotors by Kryukov, K. A. -- Correlation of Investigation results of plane compressor cascades at a subsonic velocity by [Illegible] A. I., Svyatogorov, A. A., Method of protecting turbo-machine Class 14, No. 196049 by Berezyuk, B. F. -- On determining the torques of gas turbines of transport engines by Ablamskiy, V. A. -- Calculation procedure for axial air microturbines by Averkiyev, S. M. -- Feedback in free-running gyroscopes by Torochkov, V. Yu. -- Analysis of gyrotheodolites by Kondrat'yev, I. F. -- Synthesis of a compound inertial system by Tkachev, L. I., Churakov, Ye. P. -- Realisation of a discrete control device in a gyroscope tracking system by Roytenberg, L. Ya. -- Effect of the inertia of a stabilising motor upon the operation of an intergimbal correction system in a gyroscope by Studenikin, A. I. -- Gyrotachoaccelerometer errors due to inaccurate mounting on the craft by Afon'kin, I. V. -- Simulating certain types of special gyroscopes by Vorob'yev, V. G., Vcherashniy, R. I. -- Estimate of resonance conditions in the synthesis of gyrostabilizers with elastic precession axis of nonlinear rigidity by Sokolov, Yu. N. -- Effect of the electromechanical moment of a hydraulic motor on the systematic deflection of a tri-axial hydraulic stabilizer by Slepkov, V. S. -- Methods for improving the efficiency of techniques for balancing the [Illegible] in [Illegible] by Gorbunov, B. I. -- Pilger tube-rolling mill. Class 7, No. 196692 by Shevakin, Yu. F., Savkin, P. V., Berdyanskiy, M. G., Kas'yan, V. Kh., Selifonov, I. D., Burakovskiy, V. N. -- New Aeries of step electric motors by Belen'kiy, Yu. M., Lutsenko, V. Ye. -- A device for continuous forming and welding of helical-joint pipes Class 7, No. 196702 announced by Electric Welding Institute im. Ye. O. Paton (Institut elektrosvarki) by Lashkevich, R. I., Garkalyuk, R. I., Moshkin, V. F., Skachko, Yu. N. -- A chamber for cutting metals in a vacuum by Timofeyev, P. V. -- Magnetohydrodynamic radially supported bearing. Class 47, No. 195262 by Aleksandrov, Yu. L., Metlin, V. B. -- Mold for pressing articles from a thermoplastic material. Class 32, No. 197885 [announced by the Special Design Bureau of Equipment for the Industry of Building Materials [Illegible] materialov)] by Minakov, A. G., Leshchinskiy, Ya. B., Verbnyy, I. A., Gitin, Ya. A. -- Machines and equipment for tube bending by Gal'perin, Abram Isayevich -- Stencil printing machine (LPPS-1) by Vasil'yeva, R. V., Vasil'yev, I. S., Sadov, F. I. -- Equipment for straightening propellor blades. Class 49, No. 200404 [announced by the Central Office of Design Construction and Technology (Tsentral'noye proyektnc-konstruktorskoye i tekhnologicheskoye byuro)] by Shestov, A. G., Peshkov, L. P. -- Electrostatic welder, Class 21, No. 200050 [announced by the Institute of Electric Welding imeni Ye. O. Paton (Institut elektrosvarki)] by Sukhov, O. V. -- Equipment for producing fiber from thermoplastic materials. Class 32, No. 197887 [announced by All-Union Scientific Research Institute of Fiberglass and Glass Fibers (Vsesoyuznyy nauchno-issledovatel'skiy institut stekloplastikov i steklyannogo volonka)] by Nigin, E. R., Vorob'yev, A. V., Moiseyev, A. G., Voronin, Ye. S., Borisov, S. S., Shkol'nikov, Ya. A., Polik, B. M., Chechik, A. I., Raskin, A. Ya., Bakin, Yu. N., Ostrovskiy, A. A., Bukharev, N. V., Dashevskiy, L. Ya., Kharaz, Ya. S., Tsion, A. A., Oleynikova, A. N., Krasheninnikov, O. A., Osipova, R. Ye., Lobachev, S. M., Yakunin, V. I. -- Automatic low-rate liquid batcher by Gel'perin, N. I., Polotskiy, L. M., Golub, Yu. M. -- Condenser discharge welder for spot welding. Class 21, No. 197795 [announced by the Moscow Higher Technical School im. N. E. Bauman ([Illegible] vyssheye tekhnicheskeye uchilishche)] by Kaganov, N. L., Isayev, A. P., Dryazgin, G. M., [Illegible] K. N. -- A unit for the assembly and electric welding of shells 500 to 5000 mm in diameter by Voshchilo, G. F. -- Acceleromater. Class 42, No. 198793 by Umanskiy, A. A. -- A pneumatic device for checking shape [Illegible] Class 42, No. 198697 [announced by Lvov Polytechnic Institute [Illegible])] by Groben', Yu. I., Bochkov, V. M. -- Heat treatment for enhancing the mechanical properties of greases and similar dispersion systems by Sinitsyn, V. V., Konstantinov, A. A., and A method for measuring the velocity of objects in motion. Class 42, No. 198789 by Shumolov, R. M., Rabinovich, V. A., Gutinkov, E. Yu., Oykher, Ya. I., Sharf, Ye. M. -- Determining the specific electrical resistance of rock samples by the two-electrode method by Morozovich, Ya. R. -- Experimental device for investigating new laminar surfaces in marine heat exchangers by Aranovich, Sh. M. -- Device for measuring deformation during creep tests of metal specimens at temperatures of up to 1400°C by Lebedev, D. V., Afanas'yev, Yu.A., Zorin, S. S. -- Tensile microtests of high-melting metals and alloys at temperatures of up to 1600°C in a vacuum by Ovsyannikov. B. M., Lebedev, D. V., Andrianov, Yu. Ye. -- Soviet apparatus for high-temperature metallographic research by Libova, I. V. -- Tensile tests of specimens of periodic sections of reinforcement steels in natural shape at low temperatures (reaching -55°C) by Nistratov, N. I., Timoshuk, L. T. -- Outfit for calibrating gas flow meters by Yakaytis, F. L., Boshnyak, L. L., Popov, M. S. -- Flow meter for measuring high liquid-metal flow rates by Loginov, N. I. -- A magnetostriction vibrostand for fatigue tests at a load frequency of 3 to 15 kHz by Yevstigneyev, M. I., Ozerov, O. S. -- Semiautomatic ultrasonic checking device. Class 42, No. 196417 [announced by the Leningrad Institute of Water Transportation (Leningradskiy institut vodnogo transporta)] by Bruk, M. V., Zvyagintsev, N. V., Parfeov, V. P., Zyryanov, L. A. -- Transistorized azimuth supertelescope by Mazaryuk, Ye. A. -- Arrangement for storing cold in the foundation of structures erected on permafrost ground. Class 84, No. 198245 by Gapeyev, S. I. -- Czechoslovakian refrigeration engineering for the food industry by Smutny, Frantishck -- Improvement of freezing compartments at the Siauliai Meat Combine by Krivitskas, Ch. S., Golutvo, F. A. -- Nonreturn valves by Shuvalov, A. I. -- A thermoelectric marine galley refrigerator by Tsvetkov, Yu. N. -- Refrigerating machine with gaseous working medium. Class 17, No. 196903 [announced by Moscow School of Higher Technical Education im. N. E. Bauman (Moskovskoye vyssheye tekhicheskoye uchilishche)] by Mikulin, Ye. I., Gorshkov, A. M. -- Maintenance of refrigeration installations for five-car units by Lysenko, N. Ye., Panferov, V. N. -- Basic thermal indexes of vortex-type apparatus by Alimov, R. Z.
Report Numbers
Y 3.J 66:
Subject(s)
Note
Document Date: 1/10/1968.
Reproduction Note
Electronic reproduction. Chester, Vt. : NewsBank, inc., 2013. Available via the World Wide Web. Access restricted to Readex Joint Publications Research Service (JPRS) Reports subscribers.
Terms of Use and Reproduction
Copyright 2013 by NewsBank, inc. All rights reserved.
View MARC record | catkey: 23788722