Effect of Ti content on the microstructure and mechanical behavior of (Fe<sub>36</sub>Ni<sub>18</sub>Mn<sub>33</sub>Al<sub>13</sub>)<sub>100–x</sub>Ti<sub>x</sub> high entropy alloys [electronic resource].
- Washington, D.C. : United States. Dept. of Energy. Office of Basic Energy Sciences, 2016.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy
- Physical Description:
- pages 79-87 : digital, PDF file
- Additional Creators:
- Argonne National Laboratory, United States. Department of Energy. Office of Basic Energy Sciences, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The microstructure and mechanical properties studies of a series of two-phase f.c.c./B2 (ordered b.c.c.) lamellar-structured, high entropy alloys (HEA) Fe36Ni18Mn33Al13Tix with x up to 6 at. % Ti have been investigated. X-ray microanalysis in a TEM showed that the Ti resided mostly in the B2 phase. The lamellar spacing decreased significantly with increasing Ti content from 1.56 μm for the undoped alloy to 155 nm with an addition of 4 at. % Ti, leading to a sharp increase in room-temperature yield strength,σy, from 270 MPa to 953 MPa, but with a concomitant decrease in ductility from 22% elongation to 2.3%. Annealing at 1173 K for 20 h greatly increased the lamellar spacing of Fe36Ni18Mn33Al13Ti4 to 577 nm, producing a corresponding decrease in σy to 511 MPa. The yield strengths of all the doped alloys decreased significantly when tensile tested at 973 K with a concomitant increase in ductility due to softening of the B2 phase. The fracture mode changed from cleavage at room temperature to a ductile dimple-type rupture at 973 K. Lastly, the results are discussed in terms of the Hall-Petch-type relationship.
- Report Numbers:
- E 1.99:1340293
- Other Subject(s):
- Published through SciTech Connect.
Intermetallics 75 C ISSN 0966-9795 AM
Zhangwei Wang; Margaret Wu; Zhonghou Cai; Si Chen; Ian Baker.
- Funding Information:
View MARC record | catkey: 24065478