Fatigue Properties of Type 316 LN Stainless Steels as a Function of Frequency and Waveform [electronic resource].
- Washington, D.C. : United States. Dept. of Energy, 2001.
Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy
- Physical Description:
- 33 pages : digital, PDF file
- Additional Creators:
- Oak Ridge National Laboratory, United States. Department of Energy, and United States. Department of Energy. Office of Scientific and Technical Information
- Restrictions on Access:
- Free-to-read Unrestricted online access
- The low cycle fatigue behavior of type 316LN stainless steel was investigated in air and mercury at frequencies from 0.1 to 10 Hz. Cyclic stress ratios (R) of −1 and 0.1 were used with sinusoidal, triangular and positive sawtooth wave forms. Mercury appears to reduce fatigue life at high stress amplitudes, but the endurance limit may be unaffected. Low frequency and mean stress decreased the fatigue endurance limit, but type of waveform did not appear to affect fatigue life under the conditions of these tests.
- Report Numbers:
- E 1.99:ornl/tm-2000/270
- Published through SciTech Connect.
- Type of Report and Period Covered Note:
- Funding Information:
View MARC record | catkey: 24505550