Experimental Estimation of J-R Curves from Load-CMOD Record for SE(B) Specimens / Xian-Kui Zhu, Brian N. Leis, James A. Joyce
- Conference Author:
- Seventh International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (36th ASTM National Symposium on Fatigue and Fracture Mechanics) (7th : 2007 : Tampa, FL)
- Physical Description:
- 1 online resource (21 pages) : illustrations, figures, tables
- Additional Creators:
- Zhu, Xian-Kui
Joyce, James A.
Leis, B. N.
American Society for Testing and Materials
- Restrictions on Access:
- Subscription required for access to full text.
License restrictions may limit access.
- Fracture resistance of ductile materials is often characterized by a J-R curve, and measured using the fracture toughness testing standard ASTM E1820 (Standard Test Method for Measurement of Fracture Toughness). The recommended elastic unloading compliance method or resistance curve test method requires simultaneous measurements of applied load (P), load-line displacement (LLD), and crack-mouth opening displacement (CMOD) from a single test for the single-edge notched bend [SE(B)] specimen. The P-CMOD record is used to determine crack extension, and the P-LLD record in conjunction with the crack extension is used to calculate the J-integral. However, it is well known that while highly accurate CMOD measurements can be made, the measurement of LLD is less accurate and more difficult because of transducer mounting difficulties, specimen load point indentions and load train deflections, or a combination thereof. Extensive finite element analyses showed that the LLD-based J equation may give inaccurate results for a shallow-cracked SE(B) specimen because its geometry factor ? may depend on the strain hardening exponent. In contrast for the same geometry, the CMOD-based ? factor is insensitive to the hardening exponent, and thus a CMOD-based J equation could be more accurate to be used in the determination of J-R curves. Based on the energy principle, this paper proposes a CMOD-based J equation for a growing crack using an incremental function similar to the present ASTM E1820-06 formulation that is applicable to the J calculations for a J-R curve testing. The proposed CMOD-based J formulation contains two geometry factors, i.e., CMOD-based ? and ?, and can consider the crack growth correction. The solutions of four geometry factors are presented for the SE(B) specimens with a wide range of crack length. The proposed formulation is then applied to determine J-R curves for HY80 steel using the load-CMOD record for SE(B) specimens, and the results are compared with those using the traditional LLD-based formulation. The comparison shows close agreement between these two formulations. It is recommended that the proposed formulation be used in ASTM E1820 to determine more accurate J-R curves and reduce test costs as well.
- Dates of Publication and/or Sequential Designation:
- Volume 2009, Issue 1508 (January 2009)
- 9780803169999 (e-ISBN)
- Digital File Characteristics:
- text file PDF
- Bibliography Note:
- Includes bibliographical references 30.
- Other Forms:
- Also available online via the World Wide Web. Tables of contents and abstracts freely available; full-text articles available by subscription.
Full text article also available for purchase.
Also available in PDF edition.
- Reproduction Note:
- Electronic reproduction. W. Conshohocken, Pa. : ASTM International, 2009. Mode of access: World Wide Web. System requirements: Web browser. Access may be restricted to users at subscribing institutions.
- Technical Details:
- Mode of access: World Wide Web.
- Source of Acquisition:
- ASTM International PDF Purchase price USD25.
View MARC record | catkey: 28010020