Actions for Applied Drilling Engineering

Email RIS file
Bookmark
Report an Issue

Applied Drilling Engineering

Author
Bourgoyne, A. T.
Published
Richardson : Society of Petroleum Engineers, 1985.
Physical Description
1 online resource (511 pages).
Additional Creators
Millheim, K. K. and Chenevert, M. E.
Access Online

Availability

I Want It
I Want It

Finding items...

Series
Contents
""Acknowledgments""; ""Preface""; ""Contents""; ""1-Rotary Drilling Process""; ""1.1 Drilling Team""; ""1.2 Drilling Rigs""; ""1.3 Rig Power System""; ""1.4 Hoisting System""; ""1.5 Circulating System""; ""1.6 The Rotary System""; ""1.7 The Well Control System""; ""1.8 Well-Monitoring System""; ""1.9 Special Marine Equipment""; ""1.10 Drilling Cost Analysis""; ""Exercises""; ""2-Drilling Fluids""; ""2.1 Diagnostic Tests""; ""2.2 Pilot Tests""; ""2.3 Water-Base Muds""; ""2.4 Inhibitive Water-Base Muds""; ""2.5 Oil Muds""; ""Exercises""; ""3-Cements""; ""3.1 Composition of Portland Cement"", ""3.2 Cement Testing""""3.3 Standardization of Drilling Cements""; ""3.4 Cement Additives""; ""3.5 Cement Placement Techniques""; ""Exercises""; ""4-Drilling Hydraulics""; ""4.1 Hydrostatic Pressure in Liquid Columns""; ""4.2 Hydrostatic Pressure in Gas Columns""; ""4.3 Hydrostatic Pressure in Complex Fluid Columns""; ""4.4 Annular Pressures During Well Control Operations""; ""4.5 Buoyancy""; ""4.6 Nonstatic Well Conditions""; ""4.7 Flow Through Jet Bits""; ""4.8 Rheological Models""; ""4.9 Rotational Viscometer""; ""4.10 Laminar Flow in Pipes and Annuli"", ""4.11 Turbulent Flow in Pipes and Annuli""""4.12 Initiating Circulation of the Well""; ""4.13 Jet Bit Nozzle Size Selection""; ""4.14 Pump Pressure Schedules for Well Control Operations""; ""4.15 Surge Pressures Due to Vertical Pipe Movement""; ""4.16 Particle Slip Velocity""; ""Exercises""; ""5-Rotary Drilling Bits""; ""5.1 Bit Types Available""; ""5.2 Rock Failure Mechanisms""; ""5.3 Bit Selection and Evaluation""; ""5.4 Factors Affecting Tooth Wear""; ""5.5 Factors Affecting Bearing Wear""; ""5.6 Terminating a Bit Run""; ""5.7 Factors Affecting Penetration Rate""; ""5.8 Bit Operation"", ""Exercises""""6-Formation Pore Pressure and Fracture Resistance""; ""6.1 Formation Pore Pressure""; ""6.2 Methods for Estimating Pore Pressure""; ""6.3 Formation Fracture Resistance""; ""6.4 Methods for Estimating Fracture Pressure""; ""Exercises""; ""7-Casing Design""; ""7.1 Manufacture of Casing""; ""7.2 Standardization of Casing""; ""7.3 API Casing Performance Properties""; ""7.4 Casing Design Criteria""; ""7.5 Special Design Considerations""; ""Exercises""; ""8-Directional Drilling and Deviation Control""; ""8.1 Definitions and Reasons for Directional Drilling"", and ""8.2 Planning the Directional Well Trajectory""""8.3 Calculating the Trajectory of a Well""; ""8.4 Planning the Kickoff and Trajectory Change""; ""8.5 Directional Drilling Measurements""; ""8.6 Deflection Tools""; ""8.7 Principles of the BHA""; ""8.8 Deviation Control""; ""Exercises""; ""Appendix A: Development of Equations for Non-Newtonian Liquids in a Rotational Viscometer""; ""Bingham Plastic Model""; ""Power-Law Model""; ""Appendix B: Development of Slot Flow Approximations for Annular Flow for Non-Newtonian Fluids""; ""Bingham Plastic Model""; ""Power-Law Model""; ""Author Index""
Subject(s)
ISBN
9781613991596
1613991592
Note
""Subject Index""
View MARC record | catkey: 40798856