Actions for Advanced materials XI : selected, peer reviewed papers from the 11th International Symposium on Advanced Materials, 08-12 August, 2009, Islamabad, Pakistan
Advanced materials XI : selected, peer reviewed papers from the 11th International Symposium on Advanced Materials, 08-12 August, 2009, Islamabad, Pakistan / edited by Shaheed Khan, Iftikhar us Salam, Karim Ahmed
- Conference Author
- International Symposium on Advanced Materials
- Additional Titles
- Advanced materials 11, Advanced materials eleven, and 11th International Symposium on Advanced Materials
- Published
- Stafa-Zurich, Switzerland ; Enfield, NH : Trans Tech Publications, [2010]
- Copyright Date
- ©2010
- Physical Description
- 1 online resource (x, 468 pages) : illustrations
- Additional Creators
- Khan, Shaheed, Salam, Iftikhar us., and Ahmed, Karim
Access Online
- Series
- Contents
- Electrochemical nanostructuring of semiconductors by capillary-cell method -- Inkjet printing of catalyst-inks on Si wafers and the subsequent synthesis of carbon nanotubes by chemical vapour deposition -- Effect of Zr addition on the mechanical behavior, ductility and wear resistance of aluminum grain refined by titanium -- Diffusion bonding of austenitic stainless steel 316L to a magnesium alloy -- Transpiration cooling assisted ablative thermal protection of aerospace substructures -- Processing, characterization and properties of specially constituted Zr-based bulk amorphous alloys -- Effect of heat sinks on visco-elastic & mechanical properties of EPDM based ablative composites -- Effect of vacuum arc melting/casting parameters on shrinkage cavity/piping of austenitic stainless steel ingot -- Transient liquid phase bonding of high strength low alloy steel coiled tubing -- Microstructural characterization of silicon added titanium aluminide -- Role of combustion energy in laser cutting of austenitic stainless steel -- To study the mechanical properties of unidirectionally and cross rolled Ni-Cu alloy produced in VIM -- Substrate temperature effect on optical constants of Gd₂o₃ thin films -- Tailoring of multiferroic properties of BiFeO₃ thin films by cation substitution -- An investigation into the effects of substrate temperature on magnetic properties of RF sputtered NiFe films -- Synthesis of multiwall carbon nanotube and their thin films for infrared sensor applications -- Structural and texture studies of PbS thin film -- Laser surface hardening of GCr15 bearing steel ring -- Laser surface alloying of Ni-Co electroplated low carbon steel -- Effect of deposition parameters and annealing on the morphology and optical properties of PbS thin films -- Ultrasonic surface mechanical attrition of commercially pure Ti to induce nanocrystalline surface layer -- Impact of metal-organic interface on the growth mechanism and magnetic properties of permalloy (Fe : Ni) films sputtered on self-assembled monolayers of polar and nonpolar molecules -- Estimation of the hardness for laser surface hardening of plain carbon steel -- Parametric study of ablation depths for different optical glasses using high fluence laser induced plasma assisted ablation (LIPAA) -- Optical and structural analysis of GeC thin films deposited by reactive pulsed laser ablation technique -- Development of wear resistant nano dispersed composite coating by electrodeposition -- New trends in wide bandgap semiconductors: synthesis of single crystalline silicon carbide layers by low pressure chemical vapor deposition technique on P-type silicon (100 and/or 111) and their characterization -- Analysis of material coating for damping in beam structures -- Study of the effect of coating thickness, substrate temperature and biasing voltage on various characteristics of AlN film -- The influence of Si additive on structural and microstructural properties of Cu-Zn ferrite system -- Ultra-fine ferrite grain refinement by static re-crystallization of hot rolled vanadium micro-alloyed steels -- Microstructural and magnetic properties of a Fe-Co-Ni-Al-Ti-Cu alloy -- Tuning of gadolinium based compounds for potential application in self-controlled hyperthermia treatment of cancer -- Effect of thermal treatment on coercivity of SmCo₅ sintered magnets -- Microstructural and electrochemical characterization of Ni/Ti₂N composite coating for sintered NdFeB permanent magnets -- Development of NdFeB magnet through hydrogen decrepitation -- TEM study for strengthening mechanisms in elgiloy -- The growth and characterization of the cerium contained inorganic halide scintillators -- Fatigue crack growth behavior in a rolled plate of aluminum alloy -- Elastic and plastic properties of soda lime glass by micro-indentation -- Effect of Cu on structural and FF-behavior of NiTi shape memory alloy -- A novel fabrication method for nitinol shape memory alloys -- Evaluation of phase transformation in manganese steels by eddy current method -- The effect of Sn on the impedance behaviour of Al-Zn alloys in natural chloride solution -- Metallurgical characterization of duplex steel by non destructive techniques -- Improvement in mechanical properties of high concentration particle doped thermoset composites -- Effect of the fillers contents on the chemical, mechanical and thermal properties of polymer composites -- Thermal and electrical conductivities of carbon fibers and carbon nanotubes incorporated polyurethanes composites -- Investigation of electrical properties of polyaniline nanocomposites by impedance spectroscopy -- Deposition and characterization of CdSe nanoparticles in polymeric materials -- Charge transport mechanism and the effects of device temperature on electrical parameters of Au/ZnPc/N-Si structures -- Comparative study for the design of optimal composite pressure vessels -- DLTS studies of Al diffused n-Si -- MOCVD grown quantum dot-in-a-well solar cells -- Germanium quantum dot sensitized TiO₂ solar cells -- Influence of atmospheric annealing on the conductivity of mn-doped PZT ceramics -- Development of perovskite based ceramics for ultrasonic applications -- Finite element based design of piezoelectric vibration damper -- Effects of material properties on soft contact dynamics -- Crack bridging in stress corrosion cracking of duplex stainless steels -- Software development for shear stress distribution in multicell beams of isotropic materials -- Comparative study for the design of optimal composite pressure vessels.
- Summary
- The main theme of this special volume encompasses the major technological advances of recent times, especially with respect to the significance of advanced materials and the associated technology. Young scientists, researchers and engineers working in almost any area of advanced materials science would benefit from reading this special volume. Selected peer-reviewed papers from an August 2009 symposium present the latest work in materials science, for researchers, scientists, and engineers. Some topics include electrochemical nanostructuring of semiconductors by the capillary-cell method, inkjet printing of catalyst-inks on Si wafers, diffusion bonding of austenitic stainless steel 316L to a magnesium alloy, and transient liquid phase bonding of high-strength low-alloy steel coiled tubing. Other subjects are the role of combustion energy in laser cutting of austenitic stainless steel, structural and texture studies of PbS thin film, elastic and plastic properties of soda lime glass by micro-indentation, and a novel fabrication method for nitinol shape memory alloys. The book includes b & w images.
- Subject(s)
- Genre(s)
- ISBN
- 9783038133513 (electronic bk.)
3038133515 (electronic bk.)
9780878492688
0878492682
9771013982607 - Bibliography Note
- Includes bibliographical references and index.
View MARC record | catkey: 43228754