Actions for Technologies and Properties of Modern Utility Materials XXII

Email RIS file
Bookmark
Report an Issue

Technologies and Properties of Modern Utility Materials XXII / edited by Jacek Mendala and Paweł Gradoń

Conference Author
Conference on Technologies and Properties of Modern Utility Materials (XXII : 2014 : Katowice, Poland)
Published
Zurich : Trans Tech Publications, [2015]
Copyright Date
©2015
Physical Description
1 online resource (227 pages).
Additional Creators
Mendala, Jacek and Gradoń, Paweł
Access Online

Availability

I Want It
I Want It

Finding items...

Series
Contents
Technologies and Properties of Modern Utility Materials XXII; Preface; Table of Contents; I. Materials Analysis; Microstructure and Properties of Ti-47Al-2W-0.5Si Cast Alloy; Determination of Nickel in Welding Fume by Gravimetric Method Using Dimethylglyoxime; Estimation of Carbon Balance in Reaction Zones of a Submerged-Arc Furnace during Ferrosilicon Smelting; The Origin of the Ferroelectricity in the Bismuth Titanate Bi4Ti3O12 with Perovskite-Like Layered Structure; Thermal Stability of Ti-6Al-4V Alloy with Carbon Content., Biomechanical Analysis of Selected Endoprostheses of Hip Joint by Means of Finite Element Methods; Effect of Heat Treatment on the Microstructure and Mechanical Properties of Sintered Stainless Tool Steel; The Influence of Addition of the Rare Earth Elements on the Structure and Hardness of AlZn12Mg3.5Cu2.5 Alloy; Effect of Autogenous Laser Weld on Microstructure and Mechanical Properties of Inconel 617 Nickel Alloy; II. Processing Technologies; Strength-Energy and Structural Effects of Dynamic Deformation of Aluminum Alloy., Influence of the Materials Combination for the Surface Temperature of the Bimetallic Wire Deformed in the Cold Drawing Process; Preparation of SiCw-ZTA Composites by Two-Step Sintering or Spark Plasma Sintering; Tests of Welded Joints of New Generation Austenitic, Stainless Steel HR3C; Fatigue Behaviour of Carbide Precipitation Hardened Austenitic Steels; Influence of the Thermo-Mechanical Treatment on the Properties and Microstructure of High Manganese Austenitic-Ferritic Steel., Durability of Tube Bends Made of the 14MoV6-3 Steel under Low-Cycle Fatigue Conditions and Creep at a Temperature of 500°C; Cracking of 7CrMoVTiB10-10 (T24) Steel Weld Joints; The Influence of the Solutionizing and Ageing on the Structure and Hardness of the ZnAl40Cu3 Alloy; Evaluation of Susceptibility to Hot Cracking of Inconel 617 Nickel Alloy Welds in Transvarestraint Test; Microstructure and Mechanical Properties of High Manganese TWIP Steel after Thermo-Forming Processes; The Causes of Low Impact Strength of T23 Steel Weld Joints., and Welding Duplex Steel Type X2CrNiMoN25-7-4 with Analysis of Ferrite Content Measurements in Welded Joints; Usefulness of Quartzites for the Production of Ferrosilicon; Porosity of Solid and Cored Turbine Blades of Aircraft Engines; III. Surface Engineering; Laser Remelting of Silicide Coatings on Mo and TZM Alloy; Profilometric Assessment of Surface Condition of Zinc Coatings Formed by the Continuous Galvanizing Method; The Influence of Si Content in Steel on Growth Kinetics and Structure of Hot Dip ZnAl23Si Coatings; High Temperature Cyclic Oxidation of Coatings on Ni-Based Superalloys.
Summary
Collection of selected, peer reviewed papers from the XXII Conference on Technologies and Properties of Modern Utility Materials, (TPMUM 2014), May 16, 2014, Katowice, Poland. The 42 papers are grouped as follows: I: Materials Analysis; II: Processing Technologies; III: Surface Engineering; IV: Materials and Environment.
Subject(s)
Genre(s)
ISBN
9783038267300 (electronic bk.)
3038267309 (electronic bk.)
Note
Zinc Coatings Obtained by Hot Dip Method on the High Strength Steel for Link Chains.
View MARC record | catkey: 43230137