Development program for MHD power generation. Quarterly report, October 1976--December 1976
- Author
- Becker, F. E
- Published
- United States : [publisher not identified], 1977.
[Oak Ridge, Tennessee] : [U.S. Atomic Energy Commission], 1977. - Physical Description
- microfiche : negative ; 11 x 15 cm
- Additional Creators
- Demirjian, A. M., Kessler, R., Klepeis, J. E., Petty, S. W., Sadovnik, I., Solbes, A., and Ubhayakar, S.
- Summary
- The objective of the program is the continuation of essential experimental work aimed toward the demonstration of long duration MHD generator operation with the extraction of practical power levels from open cycle MHD generators. The present program will ultimately lead to the delivery, installation and test of generators of 40 to 50 MWt capacity at the CDIF in Butte, Montana. Progress during the three month period for each of the five program tasks is presented. Preliminary performance and lofting calculations are presented for the first CDIF power channel to be operated in a 3 teslas iron core magnet in conjunction with the PERC combustor. These calculations help formulate magnet and combustor operation specifications together with cooling and instrumentation requirements for the channel. The Electrode Test Section has been completed and been subjected to three tests, with a cumulative duration of 9.2 hours. Experiments were performed in order to assess the effectiveness of current controls for a generator with external diagonal connections. The most recent experiments on the disk generator utilize radial flow and a working fluid that is a very close simulation of the combustion products of coal burned with preheated air. Nominal channel mass flows are 30 kg/sec at a corresponding enthalpy flow of 120 MWth. Experiments yielded a peak output power of 3 megawatts for an applied magnetic field of 2 tesla. Modification of the high temperature regenerative air preheater facility and assembly of the coal combustion research test rig was completed. Studies on the behavior of coal particles when injected into hot vitiated air were continued. (WHK)
- Report Numbers
- FE-2015-21
- Other Subject(s)
- 01 coal, lignite, and peat
- 014000 - coal, lignite, & peat- combustion
- 30 direct energy conversion
- 300101 - mhd generators- design & development
- 300103 - mhd generators- materials, components, & auxiliaries
- 300104 - mhd generators- duct engineering & fluid dynamics
- Air heaters
- Calculation methods
- Carbonaceous materials
- Chemical reaction kinetics
- Coal-fired mhd generators
- Coal
- Combustion kinetics
- Combustion products
- Combustors
- Control equipment
- Current density
- Diffusers
- Direct energy converters
- Distribution
- Electric conductivity
- Electric potential
- Electrical equipment
- Electrical insulators
- Electrical properties
- Electrodes
- Energy sources
- Equipment
- Fabrication
- Fluid flow
- Fossil fuels
- Fuel feeding systems
- Fuel systems
- Fuels
- Gas flow
- Heaters
- Inverters
- Kinetics
- Mach number
- Magnetic fields
- Materials testing
- Mhd channels
- Mhd generators
- Particle size
- Performance testing
- Physical properties
- Pressure measurement
- Reaction kinetics
- Research programs
- Simulation
- Size
- Slags
- Spatial distribution
- Subsonic flow
- Test facilities
- Testing
- Velocity
- Collection
- U.S. Atomic Energy Commission depository collection.
- Note
- DOE contract number: EX-76-C-01-2015
OSTI Identifier 5260886
Research organization: Avco-Everett Research Lab., Inc., Everett, MA (USA).
View MARC record | catkey: 45369322