Actions for Laser-assisted solar cell metallization processing. Quarterly report No. 6, March 1-June 30, 1985

Email RIS file
Bookmark
Report an Issue

Laser-assisted solar cell metallization processing. Quarterly report No. 6, March 1-June 30, 1985

Author
Rohatgi, A.
Published
United States : [publisher not identified], 1985
Springfield, Va.: National Technical Information Service, [approximately 1985]
Physical Description
microfiche : negative ; 11 x 15 cm
Additional Creators
McMullin, P. G. and Palaschak, P. A.

Availability

Browse Nearby on Shelf
I Want It
I Want It

Finding items...

Summary
A new lens was installed in the laser; the laser power was lowered and solar cells were made at different power levels. The concentration of the silver neodecanoate solution was changed to reduce linewidth. A cell fabrication run was completed using low-resistivity float-zone silicon. Experiments were initiated to investigate the use of titanium organometallic film, which not only forms an AR coating with a 400/sup 0/C hard bake, but may also help in bypassing front-metal evaporation because of high-reactivity of Ti with silicon. Progress in these areas is discussed.
Report Numbers
DE85018032; DOE/NBM-5018032
Other Subject(s)
Collection
NTIS collection.
Note
DOE contract number: NAS-7-100-956615
OSTI Identifier 5349374
Research organization: Jet Propulsion Lab., Pasadena, CA (USA).
View MARC record | catkey: 47357789