Actions for Erosion and redeposition experiments in the PISCES facility
Erosion and redeposition experiments in the PISCES facility
- Author
- Goebel, D. M.
- Published
- United States : [publisher not identified], 1986
Springfield, Va.: National Technical Information Service, [approximately 1986] - Physical Description
- microfiche : negative ; 11 x 15 cm
- Additional Creators
- Bauer, W., Bohdansky, J., Campbell, G. A., Causey, R. A., Conn, R. W., Hirooka, Y., Leung, W. K., Pontau, A. E., and Wilson, K. L.
- Summary
- The modification of surfaces during exposure to plasma bombardment is a critical issue in the development of limiter and wall materials for fusion confinement experiments. Controlled studies of the erosion and redeposition of materials during high flux and fluence plasma exposure are now possible in the PISCES facility. PISCES is a continuously operating plasma device which has achieved hydrogen plasma densities of over 10/sup 13/ cm/sup -3/ and electron temperatures of 5 to 24 eV over large areas. Ion fluxes of 10/sup 17/ to 10/sup 19/ cm/sup -2/ sec/sup -1/ and fluences of up to 10/sup 23/ cm/sup -2/ have been used to bombard biased samples inserted into the plasma. The plasma parameters can be selected to produce simple sputtering, or redeposition by the ionization and recycling of the sputtered target materials. Collaborative studies on the performance of Cu and Cu-Li alloys (with ANL), stainless steel (with SNLL), and graphite (with IPP at Garching, and SNLL) have been undertaken. Surface topography modification is always observed after a sufficient fluence is achieved. The net erosion rate is significantly lower during redeposition than one would expect from classical sputtering yields. The transport and deposition of different materials by the plasma to the samples during redeposition conditions results in greatly modified surface composition and morphology. Chemical sputtering of graphite during low energy, high flux (>10/sup 18/ cm/sup -2/ sec/sup -1/) plasma bombardment is observed. Chemically formed hydrocarbons are relatively easily redeposited compared to sputtered carbon. The performance of these materials, the surface morphology evolution, and the characteristics of the redeposited materials are discussed.
- Report Numbers
- DE86015000; UCLA/PPG-982
- Other Subject(s)
- 70 plasma physics and fusion technology
- 700209 - fusion power plant technology- component development & materials testing
- Alloys
- Carbon
- Copper alloys
- Copper
- Deposition
- Elemental minerals
- Elements
- Erosion
- First wall
- Graphite
- Interactions
- Limiters
- Lithium alloys
- Metals
- Minerals
- Nonmetals
- Plasma
- Sputtering
- Thermonuclear reactor walls
- Transition elements
- Collection
- NTIS collection.
- Note
- DOE contract number: AS03-84ER52104
OSTI Identifier 5271724
Research organization: Argonne National Lab. (ANL), Argonne, IL (United States).
Research organization: California Univ., Los Angeles (USA). Center for Fusion Physics and Engineering.
Research organization: Max-Planck-Institut fuer Plasmaphysik, Garching (Germany, F.R.).
Research organization: Sandia National Lab. (SNL-CA), Livermore, CA (United States).
View MARC record | catkey: 47367895