Sheet metal drafting using SolidWorks / James M. Kirkpatrick
- Author:
- Kirkpatrick, James M.
- Published:
- Boston : Pearson, [2012]
- Copyright Date:
- ©2012
- Physical Description:
- vii, 348 pages : illustrations ; 28 cm
- Contents:
- Machine generated contents note: ch. 1 Setting up the First Models, Drawing, and Modifying Them Using Drawing Constructions -- Chapter Objectives -- Introduction -- Starting a New Drawing -- The Solidworks Screen for Sketching -- Feature Manager -- Menu Bar -- Menu Bar Pull-Down Menus -- Sketch Command Manager -- Heads-Up View Toolbar -- Task Pane -- Graphics Area -- Status Bar -- Origin -- Reference Triad -- Project 1-1 Make a Solid Model of Figure 1-9 -- Project 1-2 Open Project 1-1 and Modify It -- Exercises -- Chapter Summary -- Review Questions -- ch. 2 Making Drawings with Dimensions from the First Models -- Chapter Objectives -- Project 2-1 Opening an Existing Part and Making a Drawing from the Part -- Project 2-2 Open Project 1-2 and Make a Drawing from the Part -- Exercises -- Chapter Summary -- Review Questions -- ch. 3 Making More Complex Models and Drawings with Dimensions from Those Models -- Chapter Objectives -- Project 3-1 Make a New Part (Figure 3-1) -- Project 3-2 Open Project 3-1 and Make a Drawing from the Part -- Project 3-3 Make a Four-Sided Sheet Metal Box (Figure 3-14) -- Exercises -- Chapter Summary -- Review Questions -- ch. 4 Making Complex Extruded and Revolved Features, Assigning Materials to the Models, and Making Drawings with Dimensions from those Models -- Chapter Objectives -- Project 4-1 Make a Table (Figure 4-1) -- Project 4-2 Make a Dart (Figure 4-18) -- Project 4-3 Make a New Part in Millimeters -- Project 4-4 Make New Part in Inches -- Exercises -- Chapter Summary -- Review Questions -- ch. 5 Using Extrude Cut, Hole Simple, Hole Wizard, and Rib to Make Complex Models and Drawings with Dimensions Including Tolerances -- Chapter Objectives -- Uses of Tolerances -- Clearance Fits -- Interference Fits -- Project 5-1 Make a Part with Simple and Complex Holes (Figure 5-1) -- Project 5-2 Make a Drawing from Project 5-1 (Figure 5-11) -- Project 5-3 Make a New Assembly of Three Parts with Bilateral Tolerances on All Three Parts (Figure 5-12) -- Project 5-4 Make a Drawing from Project 5-3 (Figure 5-17) -- Project 5-5 Make a New Part (Figure 5-19) -- Project 5-6 Make New Parts (Figure 5-27) -- Project 5-7 Make a New Part with a Rib on Each End (Figure 5-41) -- Exercises -- Chapter Summary -- Review Questions -- ch. 6 Sheet Metal Design I -- Chapter Objectives -- The Three Methods for Making Sheet Metal Parts -- Terms Relating to Bending of Sheet Metal -- The Sheet Metal Feature Manager Design Tree -- The Sheet Metal Toolbar (Figure 6-5) -- Project 6-1 Making a Sheet Metal Part Using the Base-Flange, Edge-Flange, Extrude Cut, and Fillet Commands (Figure 6-6) -- Project 6-2 Making a Sheet Metal Part Using the Base-Flange, Miter-Flange, Extrude Cut, and Rib Commands (Figure 6-14) -- Project 6-3 Making a Sheet Metal Part Using Extrude, Shell, Rip, Convert to Sheet Metal, Edge Flange, Extruded Cut, Unfold, and Fold Commands (Figure 6-27) -- Project 6-4 Making a Sheet Metal Part Using the Base-Flange, Miter-Flange, Jog, and Hem Commands (Figure 6-39) -- Project 6-5 Making a Sheet Metal Part Using the Base-Flange, Miter-Flange, Vent, Extrude Cut, and Revolve Boss/Base Commands (Figure 6-45) -- Exercises -- Chapter Summary -- Review Questions -- ch. 7 Sheet Metal Design II -- Chapter Objectives -- The Methods for Making Assemblies and Drawings with Bills of Materials -- Project 7-1 Making a Sheet Metal Assembly of a Street Sign Using the Base-Flange, Extrude, Insert Components, and Mate Commands (Figures 7-8 Through 7-27) -- Project 7-2 Making a Sheet Metal Assembly of a Tiller Using the Base-Flange, Extrude, Extrude Cut, Sketched Bend, Linear Pattern, Insert Components, and Mate Commands (Figures 7-28 Through 7-57) -- Exercises -- Chapter Summary -- Review Questions -- ch. 8 Making a Chassis, a Front Panel, a Rear Panel, and a Cover for a Sheet Metal Assembly -- Chapter Objectives -- Project 8-1 Making the Chassis -- Project 8-2 Making the Front Panel -- Project 8-3 Making the Rear Panel -- Project 8-4 Making the Chassis Cover -- Exercises -- Chapter Summary -- Review Questions -- ch. 9 Assemble Nutplates on the Chassis and Front Panel for the Assembly -- Chapter Objectives -- Project 9-1 Making the Nutplates -- Project 9-2 Assemble Nutplates on the Chassis for the Assembly Using Flat Head Screws -- Project 9-3 Assemble Nutplates on the Front Panel for the Assembly Using Flat Head Screws -- Project 9-4 Make an Assembly from the Chassis Assembly and the Front Panel Assembly -- Chapter Summary -- Review Questions -- ch. 10 Assemble All of the Components for the Sheet Metal Assembly and Make an Exploded View -- Chapter Objectives -- Introduction to the Real World of Sheet Metal Assembly -- Using Copy with Mates -- Inserting Components -- Applying Mates -- Project 10-1 Assemble Parts onto the Chassis and Make an Assembly (Figure 10-2) -- Project 10-2 Assemble Parts onto the Front Panel and Make an Assembly (Figure 10-5) -- Project 10-3 Assemble Parts onto the Rear Panel and Make an Assembly (Figure 10-9) -- Project 10-4 Assemble Chassis Assembly, Front Panel Assembly, Rear Panel Assembly, and the Cover and Make the Top Assembly GCM (Figure 10-12) -- Project 10-5 Make An Exploded View (Figure 10-15) -- Chapter Summary -- Review Questions -- ch. 11 Make Three Subassembly Drawings and a Top Assembly Drawing with Bills of Materials -- Chapter Objectives -- Introduction -- Project 11-1 Make the Assembly Drawing and Bill of Materials for the Chassis Subassembly GCM (Figure 11-1) -- Project 11-2 Make the Assembly Drawing and Bill of Materials for the Front Panel Subassembly GCM (Figure 11-7) -- Project 11-3 Make the Assembly Drawing and Bill of Materials for the Rear Panel Subassembly GCM (Figure 11-11) -- Project 11-4 Make the Top Assembly Drawing and Bill of Materials for the Top Assembly GCM (Figure 11-14) -- Chapter Summary -- Review Questions -- ch. 12 On-Your-Own Projects with Detailed Instructions for Making Assemblies, Exploded Views, Assembly Drawings, and Parts Lists -- Chapter Objectives -- Introduction -- Project 12-1 Make the Four Parts of the Tool Tray and Make an Assembly of It -- Make the Tool Tray Body -- Make the Tool Tray Handle -- Make the 1/4-20 Inches Machine Screw -- Make the 1/4 Inch Lock Washer -- Make the Assembly -- Project 12-2 Make an Assembly Drawing, an Exploded View, and a Parts List -- Project 12-3 Make the Subassemblies of the Stroller and Make an Assembly of It -- Project 12-4 Make an Isometric Assembly Drawing of the Handle Assembly With a Parts List -- Project 12-5 Make an Isometric Assembly Drawing of the Seat Enclosure Assembly with a Parts List -- Project 12-6 Make An Isometric Assembly Drawing of the Wheel Assembly with a Parts List -- Project 12-7 Make an Isometric Assembly Drawing of the Stroller Assembly with a Parts List -- Project 12-8 Make the 13 Parts of the Churn and Make an Assembly of It -- Project 12-9 Make an Exploded View Assembly Drawing of the Churn Assembly with a Parts List -- Chapter Summary -- Review Questions.
- Subject(s):
- ISBN:
- 9780132675833 (pbk.)
0132675838 (pbk.) - Note:
- Includes index.
View MARC record | catkey: 7403638